- Joined
- Aug 5, 2011
- Sythe Gold
- 0
- Messages
- 1,206
Anyone wanna help a guy out with a guide on making one? I get the general idea, but every one I make ends up leaking after 30 minutes or so.
Water bottle bong
- Thread starter Ivy Bridge
- Start date
- Joined
- Apr 1, 2010
- Sythe Gold
- 54
- Messages
- 1,985
try candle wax
Let it dry on the bottle.
ORRR make a apple bong.
Get an apple and a pen.
Take the ink part of the pen out and use the end you don't write with and jab it through where the stem is a little more than halfway.
Then, take the outer shell part of the pen without the ink in it and jab it through the side of the apple until it hits the center where you went through with the ink thingy.
Take it back out and get the apple parts out and then stick it back in. Put whatever you want to smoke in the top of the apple (the indent where the stem used to be)
Let it dry on the bottle.
ORRR make a apple bong.
Get an apple and a pen.
Take the ink part of the pen out and use the end you don't write with and jab it through where the stem is a little more than halfway.
Then, take the outer shell part of the pen without the ink in it and jab it through the side of the apple until it hits the center where you went through with the ink thingy.
Take it back out and get the apple parts out and then stick it back in. Put whatever you want to smoke in the top of the apple (the indent where the stem used to be)
- Joined
- Sep 2, 2005
- Sythe Gold
- 1
- Messages
- 3,973
How have you been doing it?
- Joined
- Aug 5, 2011
- Sythe Gold
- 0
- Messages
- 1,206
Like that except I would not use tin foil.
That looks sexy, I might try that out. If not the wax sounds good. Thanks
Poking a hole, sticking the stem through it, and then sealing it with massive amounts of duct tape. I've tried melting the stem through the bottle with my lighter but I haven't had any luck with that lol.
masterchief
Active Member
- Joined
- Jul 31, 2008
- Sythe Gold
- 0
- Messages
- 115
if you wanna bong, make a gravity bong.
http://www.wikihow.com/Make-a-Gravity-Bong-in-10-Minutes
it will be better than other makeshift bongs...
http://www.wikihow.com/Make-a-Gravity-Bong-in-10-Minutes
it will be better than other makeshift bongs...
Or just use a can....
- Joined
- Sep 2, 2005
- Sythe Gold
- 1
- Messages
- 3,973
That looks sexy, I might try that out. If not the wax sounds good. Thanks
Poking a hole, sticking the stem through it, and then sealing it with massive amounts of duct tape. I've tried melting the stem through the bottle with my lighter but I haven't had any luck with that lol.
Try sealing it with gum. Slightly gross, but effective.
just do some hot knives -_-
take a plastic bottle, cut it in half (glass bottle works better for resin collection)
Take your weed and pick off small parts of your bud...About the size of the O on your keyboard, maybe a little bigger.
Then take two butter knives and heat them on your stove burner or use a torch like this http://waterheatertimer.org/images/Propane-torch2-500.jpg
When the tips of the knives are glowing, then you just pick up a piece of bud with the knives, and placing your glass or plastic "hooter' press the two knives together which will then burn the bud, inhale using the "hooter"
You can do it by yourself, but that requires holding the "hooter" in your mouth..It's better to have someone else serve you up your hits...
This will get you really high, with the least amount of weed possible..plus after a while, your "hooter" get filled with resin stuck to the sides of it, can easy clean it with some steam and a straw = emergency resin when you are out of weed =D
take a plastic bottle, cut it in half (glass bottle works better for resin collection)
Take your weed and pick off small parts of your bud...About the size of the O on your keyboard, maybe a little bigger.
Then take two butter knives and heat them on your stove burner or use a torch like this http://waterheatertimer.org/images/Propane-torch2-500.jpg
When the tips of the knives are glowing, then you just pick up a piece of bud with the knives, and placing your glass or plastic "hooter' press the two knives together which will then burn the bud, inhale using the "hooter"
You can do it by yourself, but that requires holding the "hooter" in your mouth..It's better to have someone else serve you up your hits...
This will get you really high, with the least amount of weed possible..plus after a while, your "hooter" get filled with resin stuck to the sides of it, can easy clean it with some steam and a straw = emergency resin when you are out of weed =D
OK, Just a little pinprick-There'll be no more-ah!
smoke dat westside og mudbone kripz fuck the police kush
erry day
That shits insane...wanna trade for some big buddha kush ?
- Joined
- May 6, 2011
- Sythe Gold
- 343
- Messages
- 4,314
Like that except I would not use tin foil.
This exactly, just use the apple as the bowl fuck foil.
- Joined
- May 6, 2011
- Sythe Gold
- 343
- Messages
- 4,314
and get cancer.
- Joined
- Jun 7, 2010
- Sythe Gold
- 0
- Messages
- 3,435
Really? I hate people like that.. Any way just go buy one, I got a good one for 30$ and it's saved me so much trouble.
You're better off using a substance that won't melt, bro.
I once made one out of a mini tequila bottle. Worked pretty well.
If you want simpler than that, though, use a soda can.
I once made one out of a mini tequila bottle. Worked pretty well.
If you want simpler than that, though, use a soda can.
Fuck having to make home-made bongs, just buy some joint papers from the gas station for like ¢99, beats smoking aluminum foil.
<3☻;10570283 said:
ummm..no...
Hot knives/bongs you get about 90% of the THC from the weed...spliffs you get about 40%...
That is why you could take the amount of weed in a spliff and get high 2-4 times with it doing hot knives..
Similar threads
