Simba esswraith bot

[kingsword123]

Ok so ive followed a guide on how to install simba which took some serious time
(im not good with this stuff)

i then downloaded this script
http://villavu.com/forum/showthread.php?t=81178

i then clicked run and waited a bit
a rs client popped up and i logged in after that i couldnt click anything

can someone help me on how to work it

i tried following the instructions on the site but all the computer talk confused me

 

[try me]

Your best bet is posting this thread on their sight, they are really helpfull.
Even if you read through the thread you downloaded it from you'll most likely find other people have the same problem and others have showed them how to fix it.
But from the sounds of it I think your problem has to do with 'SMART'.

 

[joj0r]

hit run on simba, when you are ingame, hit "Enable SMART" to let the bot run

 

[kingsword123]

ok i have smart enabled but the bot just sits tehre

 

[sonic_fanrs]

When you can't click anything, SMART is enabled. This means that the script should be working. If not, you could just stop/start it again; it won't have to reload the client.

I'd suggest the powerbot Runespan bots; they're easier to setup and use less ram, and they work just as well or better.

 

[❤❥❤❥]

I think I can solve this for you..

when SMART is enabled on the script, the bot doesn't run because you're in control.. when SMART says disable SMART that means smart is on and the other 2 buttons should be available to click aswell.. this means the bot is working. sometimes when you login with smart disabled you have to stop the bot while you're logged in.. click enable smart so your clicks don't register on the smart client, then click run.. you should see a red dot moving and it's working.. also make sure you have brightness to the max.. you're facing NORTH the highest point possible.. GFX on the lowest.. any more problems pm me

 

[YoHoJo]

If you want to interact with smart, you need to click the 'Disable SMART' button, then you can control SMART.
When you are done, click 'Enable SMART' so the script can control again.

 

[kingsword123]

do i have to edit any of the info on the simba coding or watever

 

[kingsword123]

do i have to edit any of the info on the simba coding or watever

 

[Yenthe666]

do i have to edit any of the info on the simba coding or watever

It depends on the script. Some do, some don't.
If your script does indeed need any modification (such as a location an ID or something) it will always be in the first 40 lines of code and clearly visible!

Visit the associated thread and read the first post, the scripter will announce about everything you need to do.
Otherwise, sniff a bit around, do mind some scripts are just buggy and some don't always work!

 

[Kyle_Undefined]

It depends on the script. Some do, some don't.
If your script does indeed need any modification (such as a location an ID or something) it will always be in the first 40 lines of code and clearly visible!

Visit the associated thread and read the first post, the scripter will announce about everything you need to do.
Otherwise, sniff a bit around, do mind some scripts are just buggy and some don't always work!

This is for Simba, which is colour, not Injection/Reflection.

The script is working fine for me, just make sure you set everything up correctly according to the first post.

 

[Yenthe666]

This is for Simba, which is colour, not Injection/Reflection.

The script is working fine for me, just make sure you set everything up correctly according to the first post.

What are you stating on? About the location Id's or something?
Because yesterday I had a SIMBA script with locations in code, eg: VWB = Varrock West Bank.
I was referring to that
Good luck Kingsword.

 

[Kyle_Undefined]

What are you stating on? About the location Id's or something?
Because yesterday I had a SIMBA script with locations in code, eg: VWB = Varrock West Bank.
I was referring to that
Good luck Kingsword.

I thought you were referring to IDs of Objects/Items/etc.

That's just the constants (Which are Integers in this case) used in the SRL Library, has nothing to do with my script. Those are used with scripts that bank.