Simba esswraith bot

Discussion in 'RuneScape 3 Cheating' started by kingsword123, Jun 5, 2012.

Simba esswraith bot
  1. Unread #1 - Jun 5, 2012 at 8:15 AM
  2. kingsword123
    Joined:
    May 18, 2011
    Posts:
    1,211
    Referrals:
    0
    Sythe Gold:
    0

    kingsword123 Guru
    Banned

    Simba esswraith bot

    Ok so ive followed a guide on how to install simba which took some serious time
    (im not good with this stuff)

    i then downloaded this script
    http://villavu.com/forum/showthread.php?t=81178

    i then clicked run and waited a bit
    a rs client popped up and i logged in after that i couldnt click anything

    can someone help me on how to work it

    i tried following the instructions on the site but all the computer talk confused me
     
  3. Unread #2 - Jun 5, 2012 at 8:22 AM
  4. try me
    Joined:
    Apr 11, 2006
    Posts:
    159
    Referrals:
    0
    Sythe Gold:
    0

    try me Active Member

    Simba esswraith bot

    Your best bet is posting this thread on their sight, they are really helpfull.
    Even if you read through the thread you downloaded it from you'll most likely find other people have the same problem and others have showed them how to fix it.
    But from the sounds of it I think your problem has to do with 'SMART'.
     
  5. Unread #3 - Jun 5, 2012 at 8:32 AM
  6. joj0r
    Joined:
    Aug 5, 2009
    Posts:
    1,740
    Referrals:
    0
    Sythe Gold:
    2
    Oktoberfest 2013 Halloween 2013 Tier 1 Prizebox Christmas 2013

    joj0r Guru
    $25 USD Donor New

    Simba esswraith bot

    hit run on simba, when you are ingame, hit "Enable SMART" to let the bot run
     
  7. Unread #4 - Jun 5, 2012 at 8:59 AM
  8. kingsword123
    Joined:
    May 18, 2011
    Posts:
    1,211
    Referrals:
    0
    Sythe Gold:
    0

    kingsword123 Guru
    Banned

    Simba esswraith bot

    ok i have smart enabled but the bot just sits tehre
     
  9. Unread #5 - Jun 5, 2012 at 11:38 AM
  10. sonic_fanrs
    Joined:
    Aug 5, 2008
    Posts:
    741
    Referrals:
    0
    Sythe Gold:
    0

    sonic_fanrs Apprentice
    Trade With Caution

    Simba esswraith bot

    When you can't click anything, SMART is enabled. This means that the script should be working. If not, you could just stop/start it again; it won't have to reload the client.

    I'd suggest the powerbot Runespan bots; they're easier to setup and use less ram, and they work just as well or better.
     
  11. Unread #6 - Jun 5, 2012 at 4:41 PM
  12. ❤❥❤❥
    Joined:
    May 29, 2012
    Posts:
    384
    Referrals:
    0
    Sythe Gold:
    0

    ❤❥❤❥ Forum Addict
    Banned

    Simba esswraith bot

    I think I can solve this for you..

    when SMART is enabled on the script, the bot doesn't run because you're in control.. when SMART says disable SMART that means smart is on and the other 2 buttons should be available to click aswell.. this means the bot is working. sometimes when you login with smart disabled you have to stop the bot while you're logged in.. click enable smart so your clicks don't register on the smart client, then click run.. you should see a red dot moving and it's working.. also make sure you have brightness to the max.. you're facing NORTH the highest point possible.. GFX on the lowest.. any more problems pm me :)
     
  13. Unread #7 - Jun 5, 2012 at 5:26 PM
  14. YoHoJo
    Joined:
    Sep 4, 2005
    Posts:
    6,379
    Referrals:
    15
    Sythe Gold:
    2,625
    St. Patrick's Day 2013 Christmas 2015 Halloween 2014 Lawrence Easter 2013 Heidy Halloween 2013

    YoHoJo Hero
    Scar Programmers $25 USD Donor New

    Simba esswraith bot

    If you want to interact with smart, you need to click the 'Disable SMART' button, then you can control SMART.
    When you are done, click 'Enable SMART' so the script can control again.
     
  15. Unread #8 - Jun 5, 2012 at 8:35 PM
  16. kingsword123
    Joined:
    May 18, 2011
    Posts:
    1,211
    Referrals:
    0
    Sythe Gold:
    0

    kingsword123 Guru
    Banned

    Simba esswraith bot

    do i have to edit any of the info on the simba coding or watever
     
  17. Unread #9 - Jun 5, 2012 at 8:37 PM
  18. kingsword123
    Joined:
    May 18, 2011
    Posts:
    1,211
    Referrals:
    0
    Sythe Gold:
    0

    kingsword123 Guru
    Banned

    Simba esswraith bot

    do i have to edit any of the info on the simba coding or watever
     
  19. Unread #10 - Jun 6, 2012 at 9:06 AM
  20. Yenthe666
    Joined:
    Apr 10, 2011
    Posts:
    1,013
    Referrals:
    0
    Sythe Gold:
    0

    Yenthe666 Guru
    Banned

    Simba esswraith bot

    It depends on the script. Some do, some don't.
    If your script does indeed need any modification (such as a location an ID or something) it will always be in the first 40 lines of code and clearly visible!

    Visit the associated thread and read the first post, the scripter will announce about everything you need to do.
    Otherwise, sniff a bit around, do mind some scripts are just buggy and some don't always work!
     
  21. Unread #11 - Jun 6, 2012 at 11:10 AM
  22. Kyle_Undefined
    Joined:
    Feb 9, 2012
    Posts:
    53
    Referrals:
    0
    Sythe Gold:
    0

    Kyle_Undefined Member

    Simba esswraith bot

    This is for Simba, which is colour, not Injection/Reflection.

    The script is working fine for me, just make sure you set everything up correctly according to the first post.
     
  23. Unread #12 - Jun 6, 2012 at 11:16 AM
  24. Yenthe666
    Joined:
    Apr 10, 2011
    Posts:
    1,013
    Referrals:
    0
    Sythe Gold:
    0

    Yenthe666 Guru
    Banned

    Simba esswraith bot

    What are you stating on? About the location Id's or something?
    Because yesterday I had a SIMBA script with locations in code, eg: VWB = Varrock West Bank.
    I was referring to that :)
    Good luck Kingsword.
     
  25. Unread #13 - Jun 8, 2012 at 1:26 AM
  26. Kyle_Undefined
    Joined:
    Feb 9, 2012
    Posts:
    53
    Referrals:
    0
    Sythe Gold:
    0

    Kyle_Undefined Member

    Simba esswraith bot

    I thought you were referring to IDs of Objects/Items/etc.

    That's just the constants (Which are Integers in this case) used in the SRL Library, has nothing to do with my script. Those are used with scripts that bank.
     
< Looking to share someones Account [Great Offer] | Soul Wars >

Users viewing this thread
1 guest


 
 
Adblock breaks this site