- Joined
- Apr 7, 2020
- Sythe Gold
- 831
- Messages
- 802
Proxies
When you purchase proxies you will receive something like this:
5.16.232.215|2048|7f4840c391|539q1223d0e3
7.16.2.235|2048|7f4840c391|539q1223d0e3
55.16.2.265|2048|7f4840c391|539q1223d0e3
Proxy credentials contain 4 fields, in this example they are:
Using proxies with the OSBot client
All you have to do is add them to OSBot like this on the boot interface, under the second tab
Make sure you add the proxies in your bot software like shown in the picture above and thats it, you are good to go Happy botting!
Using proxies in the browser
This can be done with any browser, but you will require some plugins since common browsers like Firefox or Chrome do not support SOCKS5 broxies out of the box. I recommend you try Maxthon browser instead, this one has built-in SOCKS5 proxy support. The proxy setup process is outlined below.
1. Open the settings tab
2. Go to advanced section
3. Scroll down to the proxy part and select use custom proxy setting
4. Click add and fill in the proxy credentials as you received them (the name can be anything)
5. Make sure all settings are correct like in the picture below
6. Open a new tab and check the proxy is working with whatismyipaddress
Using proxifier
Proxifier can be used to apply SOCKS5 proxies system-wide, or to specific applications. OSBot has built-in proxy settings, but these do not work with mirror mode. Proxifier can be used in this case to apply the proxy to both the mirror client and the attached OSRS client. You can download proxifier here.
1. Open proxifier and go to proxy servers
Proxifier can be used to apply SOCKS5 proxies system-wide, or to specific applications. OSBot has built-in proxy settings, but these do not work with mirror mode. Proxifier can be used in this case to apply the proxy to both the mirror client and the attached OSRS client.
1. Open proxifier and go to proxy servers
2. Add a new proxy server and fill in the proxy credentials
3. Press check and start testing to make sure the credentials are correct
4. Add a new proxification rule
5. Give the rule whatever name you want, and specify if you want it to apply only to some applications (by default it applies to all), then select the proxy from the drop down menu at the bottom next to action
6. Make sure the rule is enabled and settings are correct
If you wish to purchase private proxies follow this link: Proxy – Botting Hub
When you purchase proxies you will receive something like this:
5.16.232.215|2048|7f4840c391|539q1223d0e3
7.16.2.235|2048|7f4840c391|539q1223d0e3
55.16.2.265|2048|7f4840c391|539q1223d0e3
Proxy credentials contain 4 fields, in this example they are:
- IP: 5.16.232.215
- port: 2048
- user: 7f4840c391
- pass: 539q1223d0e3
Using proxies with the OSBot client
All you have to do is add them to OSBot like this on the boot interface, under the second tab
Make sure you add the proxies in your bot software like shown in the picture above and thats it, you are good to go Happy botting!
Using proxies in the browser
This can be done with any browser, but you will require some plugins since common browsers like Firefox or Chrome do not support SOCKS5 broxies out of the box. I recommend you try Maxthon browser instead, this one has built-in SOCKS5 proxy support. The proxy setup process is outlined below.
1. Open the settings tab
2. Go to advanced section
3. Scroll down to the proxy part and select use custom proxy setting
4. Click add and fill in the proxy credentials as you received them (the name can be anything)
5. Make sure all settings are correct like in the picture below
6. Open a new tab and check the proxy is working with whatismyipaddress
Using proxifier
Proxifier can be used to apply SOCKS5 proxies system-wide, or to specific applications. OSBot has built-in proxy settings, but these do not work with mirror mode. Proxifier can be used in this case to apply the proxy to both the mirror client and the attached OSRS client. You can download proxifier here.
1. Open proxifier and go to proxy servers
Proxifier can be used to apply SOCKS5 proxies system-wide, or to specific applications. OSBot has built-in proxy settings, but these do not work with mirror mode. Proxifier can be used in this case to apply the proxy to both the mirror client and the attached OSRS client.
1. Open proxifier and go to proxy servers
2. Add a new proxy server and fill in the proxy credentials
3. Press check and start testing to make sure the credentials are correct
4. Add a new proxification rule
5. Give the rule whatever name you want, and specify if you want it to apply only to some applications (by default it applies to all), then select the proxy from the drop down menu at the bottom next to action
6. Make sure the rule is enabled and settings are correct
If you wish to purchase private proxies follow this link: Proxy – Botting Hub
Spot on
