Apprentice
- Joined
- Sep 17, 2010
- Sythe Gold
- 114
- Messages
- 847
Good Bye!
Due to legal action being started against other bot creators/devs (we did not receive a letter yet) the Project development will be stopped. All Source Files / Downloads will be removed. We now have to say Good Bye to the awesome Community. Over 100k Members on Discord and 500k Downloads a day! The Discord Community will remain open for Discussions. It was fun, we had a nice time. Thank you for the Donaions, all Devs will be getting their share by today.
- Your NecroBot Team
It also seems Niantic has been handing out Permanent Bans to botters/cheaters, for right now I would advise against botting if you care about your account(s).
This was Niantic's response to a ban appeal;
Below you can find the latest version of Necrobot along with several popular configs.
Necrobot 0.8.5: Releases · NECROBOTIO/NecroBot · GitHub
Direct Download Link: https://github.com/NECROBOTIO/NecroBot/releases/download/v0.8.5/Release.zip
High XP/Hour Config: MEGA
Snipe Config(Rare & High IV Pokemon): MEGA
If you use the Snipe Config, you will also need:
PogoLocationFeeder: Releases · 5andr0/PogoLocationFeeder · GitHub
Direct Download Link: https://github.com/5andr0/PogoLocat...load/v0.1.7/PogoLocationFeeder.GUI.v0.1.7.zip
Setup:
READ: This bot does not have its own UI to configure it, all configuration is done in the config.json file. Upon opening Necrobot.exe, the bot will automaticly start.
More info on the config.json values can be found here: Config · NecronomiconCoding/NecroBot Wiki · GitHub
Snipe Setup:
-------
Only for advanced users;
Latest source code can be found here: GitHub - NECROBOTIO/NecroBot: a Pokemon Go Bot
Pokemon Rocket API Source code: GitHub - NECROBOTIO/NecroBot-Rocket-API: NecroBot-Rocket-API
Guide to setting up the source code: Source Code · NECROBOTIO/NecroBot Wiki · GitHub
Source code for PogoLocationFeeder: GitHub - 5andr0/PogoLocationFeeder: Json feed of pokemon location data
DrZ's Github: GitHub - drz44/DrZ-Configs: DrZ's Configs to be used on Necrobot.
Necrobot 0.8.5: Releases · NECROBOTIO/NecroBot · GitHub
Direct Download Link: https://github.com/NECROBOTIO/NecroBot/releases/download/v0.8.5/Release.zip
High XP/Hour Config: MEGA
Snipe Config(Rare & High IV Pokemon): MEGA
If you use the Snipe Config, you will also need:
PogoLocationFeeder: Releases · 5andr0/PogoLocationFeeder · GitHub
Direct Download Link: https://github.com/5andr0/PogoLocat...load/v0.1.7/PogoLocationFeeder.GUI.v0.1.7.zip
Setup:
- Extract Release folder
- Run Necrobot.exe (to create auth.json file)
- Go to Necrobot/Config/ and open the Auth.json with either notepad, notepad++ or Microsoft Visual Studio
Auth Type: change to either "google" or "ptc"
and then fill in either your google or ptc details.
You'll end up with something like this;
For ptc;
For google;
Do not change anything else unless you know what you're doing
- Save and close auth.json
- Next, copy the config.json file you downloaded in the Necrobot/Config folder
So you end up with the following files in the Config folder:
- Now you're all set & ready to start the bot
Example:
- Run Necrobot.exe (to create auth.json file)
- Go to Necrobot/Config/ and open the Auth.json with either notepad, notepad++ or Microsoft Visual Studio
Auth Type: change to either "google" or "ptc"
and then fill in either your google or ptc details.
You'll end up with something like this;
For ptc;
Code:
"AuthType": "ptc",
"PtcUsername": "ReachForTheSkies",
"PtcPassword": "howdyhowdyhowdy",
"GoogleUsername": null,
"GooglePassword": null
Code:
"AuthType": "google",
"PtcUsername": null,
"PtcPassword": null,
"GoogleUsername": "[email protected]",
"GooglePassword": "howdyhowdyhowdy"- Save and close auth.json
- Next, copy the config.json file you downloaded in the Necrobot/Config folder
So you end up with the following files in the Config folder:
- Now you're all set & ready to start the bot
Example:
READ: This bot does not have its own UI to configure it, all configuration is done in the config.json file. Upon opening Necrobot.exe, the bot will automaticly start.
More info on the config.json values can be found here: Config · NecronomiconCoding/NecroBot Wiki · GitHub
Snipe Setup:
Follow the setup guidelines from setup #1
- Open PogoLocationFeeder.GUI.exe and Necrobot.exe
Note: If you have pokemon you do not want to have transfered(because they have good moves), you will have to add them to the "PokemonNotToTransfer" list or modify settings in the PokemonTransferFilter in the config.json file of Necrobot. Keep in mind that if you catch a lot of pokemons that are on the PokemonNotToTransfer list your pokemon inventory could get full, you will have to manually transfer the pokemon of that type incase that happens.
More info on the config.json values can be found here: Config · NecronomiconCoding/NecroBot Wiki · GitHub
Example:
PogoLocationFeeder;
Necrobot;
- Open PogoLocationFeeder.GUI.exe and Necrobot.exe
Note: If you have pokemon you do not want to have transfered(because they have good moves), you will have to add them to the "PokemonNotToTransfer" list or modify settings in the PokemonTransferFilter in the config.json file of Necrobot. Keep in mind that if you catch a lot of pokemons that are on the PokemonNotToTransfer list your pokemon inventory could get full, you will have to manually transfer the pokemon of that type incase that happens.
More info on the config.json values can be found here: Config · NecronomiconCoding/NecroBot Wiki · GitHub
Example:
PogoLocationFeeder;
Necrobot;
-------
Only for advanced users;
Latest source code can be found here: GitHub - NECROBOTIO/NecroBot: a Pokemon Go Bot
Pokemon Rocket API Source code: GitHub - NECROBOTIO/NecroBot-Rocket-API: NecroBot-Rocket-API
Guide to setting up the source code: Source Code · NECROBOTIO/NecroBot Wiki · GitHub
Source code for PogoLocationFeeder: GitHub - 5andr0/PogoLocationFeeder: Json feed of pokemon location data
DrZ's Github: GitHub - drz44/DrZ-Configs: DrZ's Configs to be used on Necrobot.
Last edited:
