Vaping
- Thread starter n4n0
- Start date
tfw 2hi lmao
I've had one cigarette in the past week and a half, and only 1/2 of it because it tasted like shit (I've been smoking the same kind for 7 years, up to almost a pack/day)
Vaping rocks.
Vaping rocks.
Just a heads up guys, I have a 10% discount code for steamjuice.us if anyone is planning/interested in purchasing from them. Code is good for the next 3 months
Code is: n4n0teh
Code is: n4n0teh
Hey, I bought a Vapormax V almost two months ago, and I'm getting the Ascent DaVinci in the mail today. I use it for weed, but I want to get into juices or oils or whatever it is you do haha. I know the DaVinci has oil jars, so I was wondering what's a good product to buy to start off?
I prefer to have my nightmares with open eyes.
Alright, someone help me out.
$150ish budget. Should include mod + atty/drip tip+ battery/charger + anything that will need to be replaced or wear out quickly. Mech preferably. Clones are fine.
I was looking at the 510 copper stingray mod clone by infinite. If that could be incorporated that'd be good.
Suggestions?
$150ish budget. Should include mod + atty/drip tip+ battery/charger + anything that will need to be replaced or wear out quickly. Mech preferably. Clones are fine.
I was looking at the 510 copper stingray mod clone by infinite. If that could be incorporated that'd be good.
Suggestions?
Nemesis Clone HCIGAR not fast tech
for the RDA I like Trident Clones, very easy to build on, comes with a drip tip
Sony 18650 30a Vtc5 2600mah for the batteries
And an Efest Smart Charger will suit your needs just fine
You will also need kanthal, cotton etc but im sure you can find that on your own.
I prefer to have my nightmares with open eyes.
Awesome, I appreciate this. Looks good overall. Haven't rebuilt an atty before...will be interesting.
Deep_Diver
Active Member
- Joined
- Jul 22, 2014
- Sythe Gold
- 0
- Messages
- 148
Peach mango is my fav
Hcigar >>>>>>>>>>>>>>>> fast tech
and if you want some of the better juice out there search for Vapeoholic. They only sell via fb but i promise you they are the best and pretty cheap a 30 is like 15$.
and if you want some of the better juice out there search for Vapeoholic. They only sell via fb but i promise you they are the best and pretty cheap a 30 is like 15$.
There's plenty of tutorials online on YouTube. It's not that difficult, just takes a little practice and a steady hand.
This being said - if you're building RDA's you'll also need to pick up an ohm meter.
ALWAYS, ALWAYS, ALWAYS, ALWAYS meter your builds before you use them. A short in your build could ruin your battery, mod, and possibly worse if not caught in time.
Or you know they can explode..... look up some pics in the various e cig forums its a nightmare
Hence the "or worse"
teKnoh
Member
- Joined
- Jul 22, 2014
- Sythe Gold
- 24
- Messages
- 88
I just recently went to vapor over smoking cigarettes. I went with the MVP itaste battery so I can charge my phone on the go and an Aspire Nautilus tank with the adjustable airflow. I personally like this flavor Krankberry, its a blueberry mix. it's been working great for me and I love it so far!
I prefer to have my nightmares with open eyes.
Yesterday I picked up a cheap $20 chinese mod from my friend, had a RDA already setup so I've been using that. Its interesting, because I've had neither of those in the past. Much larger clouds than I'm used to, much less flavor. It has some other issues like only firing half the time which is weird but workable... When I buy parts and build one myself I'm sure I can figure that out.
I thought of this, I'll make sure and pick one up. I've seen pictures of exploded batteries, that's sketchy as hell lol
RDA's if built properly actually give MORE flavor. You said it yourself though... chinese mod....
But yeah, as long as you meter your builds before using them, poke the coils w/ a piece of plastic or wood (something non-conductive) and watch your reading. As long as it doesn't spike drastically (slight change is okay) - You're fine.
If it does spike drastically, check for the coil touching the edge, not completely attached to your pos or neg post, etc. Rebuild if necessary until you get it right.
I just cannot stress enough though. METER, METER, METER. ALWAYS.
Panda-Splosion
Guru
- Joined
- Jan 24, 2012
- Sythe Gold
- 0
- Messages
- 1,643
Oh yeah, I don't know if you guys are aware of this site yet, but it's similar to fasttech but the shipping is much faster. Not as large of a selection, but there's a lot of deals going on and prices also generally match fasttech's.
Here's the site:
http://focalecig.com/
I believe the two main companies that this site sells are HCigar clones and some other one that I can't remember, but I hear the quality is generally pretty decent. I can't say for sure 100%, but I ordered a Panzer clone awhile back and it was pretty solidly made, especially considering I got it for about $15 while the same clone was being sold for $50 most places elsewhere.
They also offer live chat which is pretty useful, but I've never used that feature before. Also keep in mind that this company is based in China, soooo...use at your own caution
Edit: Only purchase the mods/attys, the ones being on sale as a weekly deal are usually of much better quality as well. The juices are pretty suspicious.
Also, only use HK shipping, the other ones take weeks while HK shipping takes only one.
Here's the site:
http://focalecig.com/
I believe the two main companies that this site sells are HCigar clones and some other one that I can't remember, but I hear the quality is generally pretty decent. I can't say for sure 100%, but I ordered a Panzer clone awhile back and it was pretty solidly made, especially considering I got it for about $15 while the same clone was being sold for $50 most places elsewhere.
They also offer live chat which is pretty useful, but I've never used that feature before. Also keep in mind that this company is based in China, soooo...use at your own caution
Edit: Only purchase the mods/attys, the ones being on sale as a weekly deal are usually of much better quality as well. The juices are pretty suspicious.
Also, only use HK shipping, the other ones take weeks while HK shipping takes only one.
@nano tell me what you think about the mod/RBA im going to be buying once they are both in stock.
Kayfun style orchid http://www.vapordna.com/Project-Sub-Ohm-Orchid-RBA-Atomizer-by-Aethertech-p/or0001.htm
And the nano mod
http://mmvapors.com/page/default.asp?id=64&la=1&ctID=59&prID=639#.U9uezPldWGc
My buddy has the exact same set up and it absolutely chucks @ .6 ohms.
My dripper is just too much for an everyday vape. Cats on a nemmy with 4 wraps of omega tigre wire. Dual set up opposed to quad coils. Its chucking along at .18 ohms. But it can be a bit much. Definitely a cloud chaser haha.
Kayfun style orchid http://www.vapordna.com/Project-Sub-Ohm-Orchid-RBA-Atomizer-by-Aethertech-p/or0001.htm
And the nano mod
http://mmvapors.com/page/default.asp?id=64&la=1&ctID=59&prID=639#.U9uezPldWGcMy buddy has the exact same set up and it absolutely chucks @ .6 ohms.
My dripper is just too much for an everyday vape. Cats on a nemmy with 4 wraps of omega tigre wire. Dual set up opposed to quad coils. Its chucking along at .18 ohms. But it can be a bit much. Definitely a cloud chaser haha.
I've finally found a use for my k100
I should give it a steampunk paint job haha