Ricky
Formerly Panic
Hello everyone, and welcome to my first guide.
In this guide I will be showing you how to use a USB Flash drive for extra ram on your computer.
This should be a big help to certain people who have lots of usb's lying around.
Also to revert back to using your computer's Ram just follow these steps backwards.
Disclaimer: Don´t pull out your thumb drive after you made this settings, because it´s used as virtual RAM device. It may crash your computer if you pull out your thumb drive. I´m not responsible for anything.
Step One: Right click on 'Computer' and click on Properties.
Step Two: Click on 'Advanced' then 'Settings'
Step Three: Click 'Advanced' again and select 'change'
Step Four: This is the complicated part, and due to the personal date on my usb flash i cannot provide a picture
Uncheck the top box.
It will now show you your computers ram aswell as your usb's.
For example if your usb is 2gb take away 5 from it (Always subtract 5 no matter what)
2000 - 5 = 1995
Now type this number in the first box. In the second box you type in the same number
click "set" and "OK"
Step Five: All done, restart your computer.
Feedback is greatly accepted, thank's for taking the time to read this and have a nice day. ^_^
In this guide I will be showing you how to use a USB Flash drive for extra ram on your computer.
This should be a big help to certain people who have lots of usb's lying around.
Also to revert back to using your computer's Ram just follow these steps backwards.
Disclaimer: Don´t pull out your thumb drive after you made this settings, because it´s used as virtual RAM device. It may crash your computer if you pull out your thumb drive. I´m not responsible for anything.
Step One: Right click on 'Computer' and click on Properties.
Step Two: Click on 'Advanced' then 'Settings'
Step Three: Click 'Advanced' again and select 'change'
Step Four: This is the complicated part, and due to the personal date on my usb flash i cannot provide a picture
Uncheck the top box.
It will now show you your computers ram aswell as your usb's.
For example if your usb is 2gb take away 5 from it (Always subtract 5 no matter what)
2000 - 5 = 1995
Now type this number in the first box. In the second box you type in the same number
click "set" and "OK"
Step Five: All done, restart your computer.
Feedback is greatly accepted, thank's for taking the time to read this and have a nice day. ^_^












