[Scarf4ce] Power Chopper

[Slystoner]

well how do i upload ur script into the scar program?

 

[Slystoner]

how do i open ur script with it then? I never used this stuff be4 so i have no idea how to do anything, a walkthrough for me plz.

 

[Slystoner]

it says unknown identifier 'PK'

 

[Scarf4ce]

Add me on msn at [email protected] I'll help you set it up.

 

[Slystoner]

It said "Delivery Status(Failure)" Maybe u could just write the way to do it on here, then other ppl that can't figure it out can look at what u wrote to figure it out...Oh and should i use Scar v3.01 or Scar v3.05?

 

[Scarf4ce]

It said "Delivery Status(Failure)" Maybe u could just write the way to do it on here, then other ppl that can't figure it out can look at what u wrote to figure it out...Oh and should i use Scar v3.01 or Scar v3.05?

Download Scar v3.01:

http://www.freddy1990.com/

Once downloaded, File -> Download SRL. Then open the script and try running it then. If it still doesn't work, post the errors because I haven't gotten any of those errors and pk isn't used in my script.

 

[xspikeyhairxx]

doesnt seems bad

 

[Scarf4ce]

doesnt seems bad

Thanks for the comment.

Anyone wanna post a proggy? Like 130 downloads and only 2 progress reports.. Kinda expected but still would like a few more.

 

[nikkohh]

How can i select tree type?

 

[Scarf4ce]

How can i select tree type?

Just write down the type of tree you are chopping between the ''s. You just have to write Tree, Oak, or Willow.

 

[woezie]

i have a problem when i run the script it will only point at the trees and not chop any of them

 

[Scarf4ce]

i have a problem when i run the script it will only point at the trees and not chop any of them

Did you change the name and color to the tree you are chopping on lines 37 & 38?

Treecolor = 1982520; // Color of the tree you're chopping
Treename = 'Willow'; // Name of the tree you're chopping

 

[woezie]

<<_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_>>
<< Scarf4ce Place/Tree Power Cutter
<< Worked For: 2 Hours, 12 Minutes and 9 Seconds
<< Chopped: 874 Logs
<< Did: 28 Loads
<< Thanks for using my script
<<_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_>>

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL Randoms Report |
| www.villu-reborn.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Fight Random : 5 |
| New Box[es] Solved : 3 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
i left the script running until my ae broke . It found every random that came up (well except for the ent). I was hoping for the axe head to fall off so i could give you some feed back on it.Overall very nice script

 

[Scarf4ce]

<<_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_>>
<< Scarf4ce Place/Tree Power Cutter
<< Worked For: 2 Hours, 12 Minutes and 9 Seconds
<< Chopped: 874 Logs
<< Did: 28 Loads
<< Thanks for using my script
<<_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_>>

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL Randoms Report |
| www.villu-reborn.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Fight Random : 5 |
| New Box[es] Solved : 3 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
i left the script running until my ae broke . It found every random that came up (well except for the ent). I was hoping for the axe head to fall off so i could give you some feed back on it.Overall very nice script

Thanks for taking time to post a report and feedback woezie =]. Sometimes right after clicking the tree, the script will begin the anti ban and some of the anti ban procedures are like 6-7 seconds long and by the time the anti ban is finished, the ent has eaten the axe, so I'll be fixing that. Also, which version were you using?

 

[woezie]

i was using the lastest version (1.2). I ran it some more times and it finds the axe head about 50% of the time. when the script is running it takes some time to click the next tree it would just hover back and forth between two trees then after a while click on one

 

[bollo slayer]

hey im kinda new to scar can you help me out my screenname on aol is
cubn 12 thx.

 

[~HaLo~]

on v1.2 i set it up and died to a fighting random i watched the whole thing and it looked like i chouldnt get out if the range of the random event

<<_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_>>
<< Scarf4ce Place/Tree Power Cutter
<< Worked For: 6 Minutes and 24 Seconds
<< Chopped: 39 Logs
<< Did: 1 Loads
<< Thanks for using my script
<<_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_>>
Axe head colors: 2308941 1979717 2308941
******** FOUND FIGHTING RANDOM ********
******** FOUND FIGHTING RANDOM ********
******** FOUND FIGHTING RANDOM ********
******** FOUND FIGHTING RANDOM ********

 

[~HaLo~]

i was using the lastest version (1.2). I ran it some more times and it finds the axe head about 50% of the time. when the script is running it takes some time to click the next tree it would just hover back and forth between two trees then after a while click on one

when i left the script running all night i died and logged in in lumby with no axe head and a box

 

[Scarf4ce]

when i left the script running all night i died and logged in in lumby with no axe head and a box

Are you sure you set up your nicknames properly? You use 3-4 letters from your runescape name that do no contain spaces nor capitals.

 

[skill1012345]

i cant seem to get the autoer to work
it keeps coming up with an error