Reported Post by Harped

Harped · Oct 26, 2009

Harped has reported a post.

Reason:

Botnetting.
Click to expand...

Post: HowTo: HostBoot on Xbox Live (Setup, Bots, No-IP etc...)
Forum: General Computing
Assigned Moderators: venom1

Posted by: Uber Downing
Original Content:

How to Setup & Test MeTuS Delphi 2.8

1. Getting the tools you will need

First you are going to need the MeTuS client its self. I have provided this for you so that you don't have to spend countless hours searching for the correct version on the internet
http://rapidshare.com/files/298312788/MeTuS_Delphi.exe

You will also need PFPortChecker to make sure that you have opened your ports correctly. When you do this, make sure the MeTuS bot is closed so that you don't get errors with PFPortChecker saying that MeTuS is using the port
http://www.portforward.com/store/PFPortChecker1.0.31.exe

You will also need SandBoxie to test your server once it has been created. This is so that you don't end up infecting yourself and ultimately booting yourself out from games (make sure you right click your PC -> Single Command -> Uninstall - after testing)
http://www.sandboxie.com/index.php?DownloadSandboxie

2. Setting up a No-Ip.com DNS

Head over to http://www.no-ip.com/ and register there

After creating your account, login and press "Add A Host"

Keep all of the settings the same apart from the HostName which you should change to "xxx.no-ip.info" and replacing xxx with 3 digits that aren't already taken. Make sure your IP address is in the IP box like this.

Now click create host

3. Forwarding your ports

Please note that this part of the tutorial is based off a Linskys Router. To find a guide for your router, visit http://www.portfoward.com and search for your router.

Hit 'Windows Key + R' to open Run.

A little window should appear in the bottom left saying "Run". Where it says "Open" type 'cmd' without the quotes.

A black window should appear

The black window is the command prompt. So in the command prompt type 'ipconfig/all' (without quotes). Text should start to pop up.

Spoiler (Click to View)

Keep the command prompt open because we will be needing it later.

Open up your favorite web browser and type in your 'Default Gateway' into the address bar.

A window should appear asking for user name and password. If you never configured one yourself it is usually the default user name and pass.

The default user name and pass usually is:

user name = admin

password = admin

If those do not work and you never configured your routers user name and password you can reset the router by either unplugging it for 30 seconds or hitting the reset button that is usually on the back and then putting in the default user name and password.

Now that your are in your router's configuration you need to open/forward the ports needed to control your bots. Now click the section "Applications and Gaming" that is at the top.

After clicking 'Applications and Gaming' you will see a this:

In the Application section put 'Metus'. Start = 3174. End = 3174. (You don't have to open this exact port. Any one you like, I just like this one. Also I recommend only opening one for security purposes.). Protocol = 'Both'. 192.168.1.___. You put the last three digits of your IPv4 address.

Now click "Save Settings". Your port should now be open.

Now all you need to do, is open PFPortForward (install it first), and check that port 3174 UDP and TCP is open. Make sure you have MeTuS closed before you check your ports or it may interfere.

4. Setting up your MeTuS Delphi 2.8 Client

Make sure you have all the files "MeTuS Delphi" and "stub" all in the same place. This is important for creating your server. Open MeTuS Delphi and accept the terms and conditions (you can turn this off in options).

Now, head over to the "Options" tab, and make the "Auto-Listen Port" to "3174", and uncheck the "TOS Box Enabled" checkbox. Save your settings, exit MeTuS, and re-open it to apply your settings.

Now, for building your server. Head over to "Server Builder" and in the "Port" box make sure it is set at "3174" and in the "Host" box make sure you put the host that you set earlier when you created your No-IP account. It will be xxx.no-ip.biz/info.

Leave all the other boxes empty and press "Build Server". This will place a .exe file in the directory of your MeTuS client called "server.exe". Simply open this in Sandboxie to test if your server works. If it doens't connect yourself to your MeTuS bot it didn't work, if it did, Hey Presto! Start sending your server around and gathering BOTS! You need about 20-30 to start booting people.

Thanks for reading
Uber Downing
Click to expand...