- Joined
- Mar 19, 2007
- Sythe Gold
- 0
- Messages
- 1,084
- Age
- 33
Well, I haven't seen any descent "how to make a server guide" on sythe, so I decided to post one.
Alright, I will be making this as I go, so tell me if there's any errors.
Step 1:
Alright first, you will need Winrar, which can be downloaded here Then select your language, and follow the steps to install.
Step 2:
Downloading Java. Now Java is the program that will run your server basically. So to download the newest version of Java go here
Now you're going to want to click on the top one which is this one
Next, you are going to want to open up my computer. Click "view system information" hit "advanced" at the top. Then Enviromental values at the bottom
Now after you clicked new put the name as "CLASSPATH" Put this for the value
Then make another one and for the name put "PATH" for the variable put
Step 3:
Getting no-ip
Next step is to go to no-ip Register, then
Go to your no-ip then click "add a host"
Step 4:
Opening port 43594
Now, go to start, control panel, Network and internet connections, network connections, then right click on your internet connection. Select properties, then advanced and settings.
Then click the exceptions tab at the top, and click "add port". For the name put your server name. For the port put 43594.
Step 5:
Port-Fowarding , probably the most difficult part. This is for router users. If you're not using a linksys router, please go here
Open your cmd by going to Start > Run > cmd.Type in "ipconfig" It will say your default gateway. Open up a webbrowser, Just replace all thats in the address box with the ip address of your router. By default the ip address should be set to 192.168.1.1.
It should open up a box asking for a username and password.By default the username is blank, and the password is admin. Click the Ok button to log in to your router.
Click the applications and gaming tab at the top. It should then show this
Once you're there click the Port Foward Ranging at the top. Now you're going to want to type the porper things into the correct boxes
Example:
Application Name: RSPS
Start - End Port: 43594-43594 (Change to which ports to want to enable)
Protocol: Both
To IP Address: Your IP at Start > Run > Cmd > ipconfig
Enabled: Checked/Yes
Then click save
Step 6:
Getting a source
Now, this is probably the most important thing, since this is going to be your server.
You're going to want to download a source, you can get one from www.moparscape.org, or www.Runelocus.com, or any other private server site.
For example we'll use the source I released found at moparscape.
Now once you've downloaded one, you're going to want to open up client.java with notepad, and press ctrl+H.
For the first line enter the name of the server you downloaded. 2nd line put in your server name, then click "replace all"
Step 7:
Basic server edits
Alright so you've got everything set, but you want to make yourself an owner? Well, find your name in the characters folder.
Then double click on your name, and find player rights. Now replace the 0 and put a 3
Here's the key
And of course 0 is a regular player.
Adding an npc
To add NPC's you work in autospawn.cfg
Open it and you will see many things looking like eachother.
Now add this at the top
Code:
spawn = NpcID CoordX CoordY 0 0 0 0 0 2 NPC Name
Change NpcID to the ID of the npc.
Change CoordX and CoordY to the coords where you want the npc to be. Note this isn't hard at all so don't get a bighead ;]
A compiler
Now this is a very basic compiler, but I like using it.
Copy and paste that in the compiler by finding the compiler, right click and edit.
Now that should be it! Post if you have any more questions!
Alright, I will be making this as I go, so tell me if there's any errors.
Step 1:
Alright first, you will need Winrar, which can be downloaded here Then select your language, and follow the steps to install.
Step 2:
Downloading Java. Now Java is the program that will run your server basically. So to download the newest version of Java go here
Now you're going to want to click on the top one which is this one
Next, you are going to want to open up my computer. Click "view system information" hit "advanced" at the top. Then Enviromental values at the bottom
Now after you clicked new put the name as "CLASSPATH" Put this for the value
Code:
CLASSPATH=C:\Program Files\Java\jdk1.6.0_05\bin;%CLASSPATH%;
Code:
C:\Program Files\Java\jdk1.6.0_05\binStep 3:
Getting no-ip
Next step is to go to no-ip Register, then
Go to your no-ip then click "add a host"
Step 4:
Opening port 43594
Now, go to start, control panel, Network and internet connections, network connections, then right click on your internet connection. Select properties, then advanced and settings.
Then click the exceptions tab at the top, and click "add port". For the name put your server name. For the port put 43594.
Step 5:
Port-Fowarding , probably the most difficult part. This is for router users. If you're not using a linksys router, please go here
Open your cmd by going to Start > Run > cmd.Type in "ipconfig" It will say your default gateway. Open up a webbrowser, Just replace all thats in the address box with the ip address of your router. By default the ip address should be set to 192.168.1.1.
It should open up a box asking for a username and password.By default the username is blank, and the password is admin. Click the Ok button to log in to your router.
Click the applications and gaming tab at the top. It should then show this
Once you're there click the Port Foward Ranging at the top. Now you're going to want to type the porper things into the correct boxes
Example:
Application Name: RSPS
Start - End Port: 43594-43594 (Change to which ports to want to enable)
Protocol: Both
To IP Address: Your IP at Start > Run > Cmd > ipconfig
Enabled: Checked/Yes
Then click save
Step 6:
Getting a source
Now, this is probably the most important thing, since this is going to be your server.
You're going to want to download a source, you can get one from www.moparscape.org, or www.Runelocus.com, or any other private server site.
For example we'll use the source I released found at moparscape.
Alright, well I've had some time to edit my server more since I tore a ligament in my foot. So I thought when I'm done I'd release it to Moparscape. Now this is my first server, so don't flame me too hard. Anywho, here it is enjoy! Download here
CREDITS!
50% me for editing
50% t0xicness/ reforced for the base
Now once you've downloaded one, you're going to want to open up client.java with notepad, and press ctrl+H.
For the first line enter the name of the server you downloaded. 2nd line put in your server name, then click "replace all"
Step 7:
Basic server edits
Alright so you've got everything set, but you want to make yourself an owner? Well, find your name in the characters folder.
Then double click on your name, and find player rights. Now replace the 0 and put a 3
Here's the key
Code:
1=mod 2=admin 3=owner 4=secret adminAdding an npc
To add NPC's you work in autospawn.cfg
Open it and you will see many things looking like eachother.
Now add this at the top
Code:
spawn = NpcID CoordX CoordY 0 0 0 0 0 2 NPC Name
Change NpcID to the ID of the npc.
Change CoordX and CoordY to the coords where you want the npc to be. Note this isn't hard at all so don't get a bighead ;]
A compiler
Now this is a very basic compiler, but I like using it.
Code:
@echo off
title Server Compiler
"C:\Program Files\Java\jdk1.6.0_05\bin\javac.exe" -cp . *.java
pauseNow that should be it! Post if you have any more questions!
) , but how do I actually play on it lol.... do I use moparscape.org ? or what? I know I compile my changes, then click run... but then whats the name / port or what do i do?
