- Joined
- Oct 2, 2010
- Sythe Gold
- 1
- Messages
- 144
Hey guys thought i would share with you my new setup. We are going to be building 15 of these rigs so 75 total gpu's (adding a 5th card to all of them) and once we find a spot that has enough power to rent we will be adding a bunch more.
each rig will have the following
4x Gigabyte 270
1x 1000w GOLD coolmaster psu
1x 60gb ssd
4x riser cables
4gb ram
Total Cost $1400 (Per Rig)
Will Make about $30 a day not counting electricity costs
We plan on getting an air conditioner called a Movin Cool which will be a very nice addition but they are very expensive
Here are some pictures of the two we have now.. ( i also have a 270x running on my gaming pc)
Aluminum Case
Here are the peices used (has enough to build 4)
Here are both rigs put together.
Here is my total Hashrate
Here is my Config to get 470+ kh/s per card
each rig will have the following
4x Gigabyte 270
1x 1000w GOLD coolmaster psu
1x 60gb ssd
4x riser cables
4gb ram
Total Cost $1400 (Per Rig)
Will Make about $30 a day not counting electricity costs
We plan on getting an air conditioner called a Movin Cool which will be a very nice addition but they are very expensive
Here are some pictures of the two we have now.. ( i also have a 270x running on my gaming pc)
Aluminum Case
Here are the peices used (has enough to build 4)
Here are both rigs put together.
Here is my total Hashrate
Here is my Config to get 470+ kh/s per card
-w 256 --intensity 19 -v 1 -g 1 --lookup-gap 2 --thread-concurrency 24000 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20
I will definitely update this thread when we make our order and start building the rest of the rigs so stay tuned
UPDATE 3/3/14
We have now installed a 2nd breaker to handle just our rigs. we can now start ordering the 75 gpu's we are going to need. here are some pictures of the breaker install Please Note this was not made to be a permanent part of our basement, that is why we did it the way we did, after about 3 months we will be moving to our own building:
Pictures:
Took us awhile to run all the cables we needed to the breaker but we managed to do it
all wired up, tested and ready to go!
the cables along the ceiling
These outlets will be attached to the shelves when we get them
will update again when we make more progress
I will definitely update this thread when we make our order and start building the rest of the rigs so stay tuned
UPDATE 3/3/14
We have now installed a 2nd breaker to handle just our rigs. we can now start ordering the 75 gpu's we are going to need. here are some pictures of the breaker install Please Note this was not made to be a permanent part of our basement, that is why we did it the way we did, after about 3 months we will be moving to our own building:
Pictures:
Took us awhile to run all the cables we needed to the breaker but we managed to do it
all wired up, tested and ready to go!
the cables along the ceiling
These outlets will be attached to the shelves when we get them
will update again when we make more progress












































