- Joined
- Jul 22, 2008
- Sythe Gold
- 0
- Messages
- 529
If you used my guide please dont forget to say thank you or leave a comment
1.These are the things you need
[*]Wiimote
[*]Nunchuck
[*]Soldering Iron
[*]Solder
[*]3mm Blue Led
[*]Tri-Wing Screwdriver
[*]Phillips Screwdriver Set
[*]Cup Cake Mat:rofl
Step 1
First you get your wiimote, nunchuck, soldering iron, solder, etc...
Step 2
Now you take your tri-wing screwdriver and you take your nunchuck apart like this..
Step 3
You take your 3mm led and you solder to these points on the nunchuck board like so
Step 4
Now your nunchuck should look like this
Step 5
You plug your nunchuck to your wiimote and see if it works if so put everything back together like this
And there you go your modded nunchuck now on to the wiimote
Step 1
You get your wiimote and take it apart like so
Be careful on this part take your phillips flathead and pry your wiimote cover off but dont break it
Step 2
Now you take the board out of the casing and flip it over
Step 3
You solder your 3mm led to these points
Step 4
Now bend your led over to the other side and position it like so
Step 5
Pop your batteries back in and see if it works. im my case it does
Step 6
If it works put your wiimote back together
GRATZ! you have now finished your! wiimote and nunchuck mod! here is the finished product!!
Hope you enjoyed my guide





