How to Genie a Lighter!

[TehNoobWorld]

How to Genie a Lighter!


Hi Sythe, This will be my first guide so please don't be too negative! :laugh:

The guide is on how to genie a lighter, In other words, Increase the flame ^_^

Difficulty Rating: 3/10 - Fairly easy, once you have done it once you can do it again.. and again

Items needed:

• A plastic disposable lighter

Step 1:

Remove the metal casing from around the top of the lighter
and hold onto it.

Step 2

Here is the slightly complicated part, move the flame length switch to maximum, The lift up the switch (So that it does not move the cog)
and bring it back to minimum then press it down so that it is touching the cog again, then move up to maximum again, and repeat as many times as you like.

Step 3

Put the metal casing back on the lighter, then pass to your unsuspecting friend when they ask for a light..

Warning!
If pushed up too much the lighter may start leaking gas, So to avoid this every 3 twists or so check to see how high the flame it

 

[Smd I Skill]

thats pretty cool, more pics and colour would help but pretty good guide 6/10

 

[TehNoobWorld]

thats pretty cool, more pics and colour would help but pretty good guide 6/10

Thanks, I might edit more in later

 

[Inventor]

Not bad. I might try this eventually. 5/10

 

[DeeKu]

If you didnt know this, you're retarded.
But nice guide and detailed well
7/10.

 

[TehNoobWorld]

If you didnt know this, you're retarded.
But nice guide and detailed well
7/10.

People often say to me "how do you do that?"

Just thought I'd share it

 

[DeeKu]

People often say to me "how do you do that?"

Just thought I'd share it

Yea it's cool. I like this guide. compared to some 'useless' guides (hehe depends on what do you think is useless) keep it up man.

 

[AdobeFlash]

more pics would help
but thanks

 

[AreS-]

I knew how to do this already, but take a picture of the cog.

 

[TehNoobWorld]

I knew how to do this already, but take a picture of the cog.

Yeah, I'll do that later and edit it in

 

[Skilla]

It's known on the street as 'jacking up' a lighter.

It's simple, just clip the metal off around the top, lift up the round bit push it down and move it right, then lift up move around left, then down, right again and repeat until you get the flame as high as you want it.

[P.S. It's suprisingly easy to blow the lighter up so be careful]

 

[TehNoobWorld]

It's known on the street as 'jacking up' a lighter.

It's simple, just clip the metal off around the top, lift up the round bit push it down and move it right, then lift up move around left, then down, right again and repeat until you get the flame as high as you want it.

[P.S. It's suprisingly easy to blow the lighter up so be careful]

Jacking up / Tinkering / Genieing - Lots of different words for it.

 

[The Dark]

No...