I'm really new at this, and I've read a bunch of tuts on how to do this, but I still have problems with detecting the proper image. Sometimes the mouse moves but never the correct spot, and other times it doesn't move at all, depending on what code I have tried.
I'm using scar 3.22, and here is my most recent code.
Right now it is very simplified, and later I'm going make it repeat every few seconds and refresh the browser, but not until I can figure this out. I'm sure it is something really simple but I don't know. If anybody else knows, that would be a great help. Thanks!
-------------------------------------------------------------------------
Edit* Okay I found out what was wrong. I think the bitmap string was too long. I found another tut at http://www.villavu.com/forum/showthread.php?t=49089 that explained to use a smaller part of the image which helped out a lot.
I'm using scar 3.22, and here is my most recent code.
Code:
program New;
// Declare variables.
// Declaring vampegg bmp, mouse x and mouse y var
var
vampegg: Integer;
x, y: Integer;
procedure loadbmps;
begin
// The bitmap of the vampire egg in code
vampegg := BitmapFromString(26, 29, 'beNrV1bENgzAQBVBmoKdhg' +
'YgBkFJSRvQZIGNkC1Zgy5z0pa/T9/kMCU2s3xDjp+NsSNf99XitK3' +
'OVgzyXxfKj8x4Grz3m2XKQ4lpSCEFoa98fobyGy33bbK3Fl4dfms8' +
'YgqCogbpP06m2S9+kdaYlYI0qa2tqSWFsmmgJmBQW7kKihYgPNEa0' +
'2ziWmghhbcKWGilbJTsoheExcUJwA0DTCIZnPtwFajy9Na2WsjBp2' +
'ikNIKlSA3VQQ5eahVHjneWnjD0XKtFs2KxfLvEHrElBY4TC9oVUTb' +
'NhU1IAv4o8/95JKGg+Asqsp0LNBqZkFV+o0KlRHmQIhk5O1cwwZ/8' +
'Hr3K+HB9kOG+H');
end;
procedure moveclick;
begin
if(findbitmap(vampegg,x,y))then
begin
movemouse(x, y)
wait(200)
clickmouse(x, y, true) //True = left click; False = right click
end;
end;
begin
loadbmps;
moveclick;
FreeBitmap(vampegg);
end.
Right now it is very simplified, and later I'm going make it repeat every few seconds and refresh the browser, but not until I can figure this out. I'm sure it is something really simple but I don't know. If anybody else knows, that would be a great help. Thanks!
-------------------------------------------------------------------------
Edit* Okay I found out what was wrong. I think the bitmap string was too long. I found another tut at http://www.villavu.com/forum/showthread.php?t=49089 that explained to use a smaller part of the image which helped out a lot.

