- Joined
- May 11, 2009
- Sythe Gold
- 87
- Messages
- 2,611
How To Disable a Wireless Internet Connection From A PSP
NOTE: You MUST have a computer with a direct connection also (one that is not wireless) to Change the settings back!
Step: One
Log onto a wireless connection from a psp
I personally use this whenever someone tries to use the internet on my computer, therefore not letting me on
NOTE: You MUST have a computer with a direct connection also (one that is not wireless) to Change the settings back!
Step: One
Log onto a wireless connection from a psp
Step: Two
Go to Tools<Display Connection Status ----- OR find out the IP address of your Target
Step: Three
Type the IP address you found into the Adress BOX
Step: Four
Log onto the Wireless Router --- If you do not know the password user, try theses :
username:blank
password: admin
username:admin
password: admin
username:admin
password: password
I have had each of these work before on linksys routers. And as for reseting the router, if there is a small reset hole in the back of this unit, you can put a paper clip or other small device into it and press. The router should reset within 10 seconds. The lights will flicker when this happens. This will reset all to default settings, then try these passwords again.
After logging ON, Go to Basic Settings and change the Cable network settings to random numbers letters and combinations
This should disable the Wireless--- TO reset, just change back to what it was previously
Note: I take no responsibility for any damages that you cause to yourself or others, and by reading this guide you release me of any responcibiity for damages.
Log onto the Wireless Router --- If you do not know the password user, try theses :
username:blank
password: admin
username:admin
password: admin
username:admin
password: password
I have had each of these work before on linksys routers. And as for reseting the router, if there is a small reset hole in the back of this unit, you can put a paper clip or other small device into it and press. The router should reset within 10 seconds. The lights will flicker when this happens. This will reset all to default settings, then try these passwords again.
After logging ON, Go to Basic Settings and change the Cable network settings to random numbers letters and combinations
This should disable the Wireless--- TO reset, just change back to what it was previously
Note: I take no responsibility for any damages that you cause to yourself or others, and by reading this guide you release me of any responcibiity for damages.








