C4D help needed please!! (Pictures)

[runescapesupplyguy]

OK when I try to make some 3D text it becomes invisible, unless I highlight it.

Here is what it looks like when I highlight it:
http://screensnapr.com/v/T54yeP.jpg

Here is what it looks like if I do not highlight it:
http://screensnapr.com/v/yX5aYW.jpg

These are the steps I am taking:
1. First I create some text. http://screensnapr.com/v/VBzol3.jpg
2. Then I create an Extrude NURBS. http://screensnapr.com/v/DLuUL4.jpg
3. Next I drag the text into the Extrude NURBS. http://screensnapr.com/v/uCf7Sl.jpg

Shouldn't I be able to see the 3D text now?
Here are the settings for the text and the extrude NURBS:
Text:
http://screensnapr.com/v/N1TrG8.jpg
http://screensnapr.com/v/MhgBGW.jpg
http://screensnapr.com/v/8iBbbF.jpg

Extrude NURBS:
http://screensnapr.com/v/Jxh8ex.jpg
http://screensnapr.com/v/lyIzHV.jpg
http://screensnapr.com/v/zuFNhY.jpg
http://screensnapr.com/v/q5eM4T.jpg
http://screensnapr.com/v/Ummqk2.jpg

I also tried this, and it cam up with the same results:
http://screensnapr.com/v/SLqSRg.jpg

When I highlight the MoText:
http://screensnapr.com/v/orQzCL.jpg

When I do not highlight the MoText:
http://screensnapr.com/v/NS5N3T.jpg

Here are the MoText settings:
http://screensnapr.com/v/dFji4i.jpg
http://screensnapr.com/v/6YxJFW.jpg
http://screensnapr.com/v/Clf4e2.jpg
http://screensnapr.com/v/prDQt5.jpg
http://screensnapr.com/v/736nRb.jpg
http://screensnapr.com/v/ekeJM4.jpg
http://screensnapr.com/v/Fr6Ko4.jpg
http://screensnapr.com/v/dOv49k.jpg
http://screensnapr.com/v/wDyZNt.jpg

I am a huge noob when it comes to C4D, so please explain things thoroughly. If anyone can help me out, I would appreciate it very much.

Also, I tried re-installing the software already.

Kind regards,
Rssg

 

[Emperor Nero]

Misread. Will get back to you.

 

[stui]

This is an interesting problem, have you tried typing something in the text area ?

 

[runescapesupplyguy]

This is an interesting problem, have you tried typing something in the text area ?

yes, it doesn't matter what text it says, it is still invisible.

 

[Spraynwipe]

It may not be rendering in real time (lack of ram or software issue). Try and see a render preview.

If that doesn't work, you may have also dragged the font layer above or below the extrude nerbs. I believe you have to do it the other way. I'll need to check later.

 

[runescapesupplyguy]

It may not be rendering in real time (lack of ram or software issue). Try and see a render preview.

If that doesn't work, you may have also dragged the font layer above or below the extrude nerbs. I believe you have to do it the other way. I'll need to check later.

http://screensnapr.com/v/TwJhOw.jpg
mkay so that seemed to work, but how can i view it in real time? I dont think it would be my ram, i have 4 gb + a gaming computer...