Woodcutting

what wc level is a good level to start chopping yews with rsbot?

 

I'd personally suggest 65 or 70.

 

anything higher than 80

 

Around 80, otherwise it's just too slow...
But if your going to use rsbot, start ASAP seeing as your not wasting your own time.

 

well if you are using a Bot you can start whenever because it is not you that is wasting your time.
But a good level would be 75.

 

ok good replys, im going to get to 62 with willows, then do yews, thanks everyone for such a fast response

 

I'm 81 and its slow l reccomend 85 - 90 tbh.

 

It honestly doesn't matter. I got 99 woodcutting with rsbot and i still feel like i cut yews the same speed as i did at 60, so it's all on what you think.

 

I have lvl 82 wcing right now 50k from 83 and truckin. I would say anything higher than 80 is a safe bet.

 

I did willows to 75wc using Rsbot, then did vines to 91.

91-99 I used RSBOT cutting yews, took about a week or so.

It's decent after 90.

 

No level is high enough to start cutting yews.
My main has 99 wcing and it takes fucking AGES to get a log.
Botting it doesn't matter, start at 60. But if you do it by hand then don't even do it. I did willows from 30-99. Much faster compared to yews.
But willows have gone down so you won't make the 50m+ that I did.

 

You should acctualy try willows till 99. Yea it sounds bad but it will work fast.

 

Teaks are faster.
You should try them.

 

I did willows to 99.

 

Not the best but good ^_^
But,For very good Xp you should try choking ivy. Its very good. :noworry:

 

I would start at around 70-75 woodcutting.

 

about lv 80 for it to be fast

 

lv 80, otherwise it'll take forever.

 

70+, even with bots. Good luck.

 

Just start at 60, its a bot...