.

 

So what is running the script on the client after it is executed remotely by ADB and then the ADB server is terminated?

 

.

 

Again, a non answer to a smple question. No hand holding required for me, you may need it though. You seem to believe TeamViewer or any other application is detected while yours is not. Which goes against the logic you yourself are even saying, because you claim that they don't look at process or application lists. If ADB is used to activate a file/bot on the client device, I was wondering how you believe it's not detectable or less detectable than a normal application due to ADB server being terminated. You just got done saying how ADB is irrelevant because it's just used to launch the bot, which the bot is a process/app just like teamviewer or a free touch recorder

Which brings me to the final question, a real zinger really because this logic is so irrefutable that it will leave you stumped and frustrated for hours like the last. I have no doubt you'll talk yourself into a circle again for everybody to see, but should you choose not to respond the silence will be deafening and even more questions from the public will arise about your credibility.

Instead of annoying and complicated setups of camera angles and zoom ins and all that shit that is needed for every single one of your bot scripts before it can be ran, why aren't these programmed into the bot scripts to only execute once? Is it because you can't loop the recorded taps over and over with that feature because it would be too obvious that you're replaying a simple macro recording from a free app and using some bridge protocol like ADB to try and mask it by executing it remotely instead of just telling them to download an app and run your file?

Because surely the leading theory right now is you're using some sort of mouse/touch recorder and having that file activated by remote execution from ADB.

Regardless if the theory is true, everybody can tell you're a complete and utter novice for requiring steps like the ones below before somebody can run a shitty fucking generic clicker script.

From XB Agility

"
Setup:

• Navigate to the monkey bars under Edgeville.
  
• Cross the bars once.
  
• Wait for the monsters to become unaggressive. If needed, bring food.
  
• Ensure your camera is zoomed all the way in.
  
• Perform the standard camera setup procedure: Home
  
• Minimize the chat box.
  
• Minimize any game tab you have open (inventory, mage book, etc).
  
• Ensure you are in "standard" mode. You shouldn't be in "single tap" or "tap-to-drop" mode.
  
• Ensure the NPC and Player attack options are both set to "hidden".
  
• Cross the bars once again.
  
• Your final state should look like this: "

So not only does everybody need a specific device with a specific resolution, every script requires that same stupid setup shit to put everything in the exact same spots. What a complete fucking joke. Isn't selling freeware against the rules? Just because you made it executable from ADB to try and mask it doesn't make it any less free.

I very much doubt you even have pixel color detection. Even a simple pixel bot could tell the difference between a red spider and a brown fucking ladder. Your NMZ bot doesn't even use overloads or any att/str/range potions. Peace out.

 

The whole thread is like reading the RiD situation all over again. Which is still being defended 5 year later on their forum.

 

As someone who has been following this thread from the beginning, I would respectfully ask that you do not ignore the concerns HandFarmer has raised. Feel free to disregard anything you perceive as personal attacks, but please try to address the technical points he is making.

While I was initially extremely interested in this project, I'd be lying if I said the points HandFarmer has made haven't made me a bit wary.

So, in case there are others that have become concerned like myself, please continue to address critiquing arguments against XiaBot. If HandFarmer is right in saying I can use a free auto-clicking app to perform the same tasks and achieve the same results that XiaBot offers, I need you to justify XiaBot's $24.99/mo pricetag. The monthly fee and cost of the specific tablet I'll need to buy have me wondering if I should just try the free auto-clicker app route instead, but I'm hoping you can provide technically sound reasonings for why XiaBot is the better choice. Thank you and I look forward to your future replies/updates.

 

RIP this man. Online multiple times over 24 hours since my reply as well as concerned potential customers responses and the silence continues.

Don't fall victim to the "input heuristics" and other jargon that is continously spouted nonsensically. I can assure you that it's a non-argument. The silence is deafening as I said it would be. They've logged in and read these posts multiple times now.

Red Flags
1) Specific device required
2) Extreme setup steps required
3) Everything must be in exact same locations
4) Random bullshitting jargon
5) Scripts appear to not actually have color detection (NMZ bot can't use overloads, turn off npc attack options is required on all scripts. So on the agility one if the script missclicks the ladder while a spider hitbox is in range it won't deviate, etc.)
6) Extremely simple scripts composed of very few clicks which need to be in exact specific locations.
7) Bot itself cannot complete setup steps just 1 time and then loop specific functions (this implies that the bot is just looping a recording and if the setup was included in it then it would reloop the setup making it extremely ineffecient and obvious that it's a recording)

 

I hope the release will still go on tomorrow after those negative posts, I'm still looking forward to this bot tbh I don't care how it's made or how simple it is as long as it works and has a very to non existing ban rate. You still have my full support!

 

Yeah I figured some people would still have this sentiment. People do enjoy being spoonfed. A fool and their money...

I really don't care what people do with their money or time, but we should all be expected and held accountable to be honest. Especially in business. I've shown examples of free recording apps that also have no ban rates and you don't need to buy a bunch of random and useless crap for no reason:
07 Mobile afk fletching bot / will work as moneymaker aswell

 

And just like that, XiaBot was never seen again. Lol. Yikes

 

No response in this case is the worse response. There's nothing wrong with admitting you're using some kinda simple auto clicker technique and you would probably get more customers because a lot people are willing to pay for convenience but not saying anything will hurt your business on this website

 

I don't care if the bot is particularly simple, I'm still interested. Even if it's a bust and the ban rate for mobile has a huge spike immediately after I buy it, I'm still curious to see what botting on mobile looks like. I am still interested in being a guinea pig for what may be the future of botting. Hand farmer can state "A fool and their money...", and feel like getting a free auto clicker is the better choice, but he must just have a different perspective of the time value of money than I do. $24.99 to be spoonfed is peanuts.

 

You can download a free recorder, and do it on a device on your own so you don’t have to give this joker $25, and buy a $60 tablet. Jesus you are dumb

 

Ok fine, the $85 is a small price to pay to be spoonfed. I will probably download a free recorder, and try out xiabot, and continue to play with traditional bots. It's all fun, and I like building accounts

 

Very cool. Looking forward to seeing this further down the road

 

XiaBot Release 1.0

Release link to people interested ^

 

this is interesting !

some bank standing mobile would be nice xD

 

Do you have any intention on adding a FAQ or troubleshooting guide? I bought the tablet and the subscription, and have followed all the guides on the web site to the letter, yet when I launch xiabot it always says "no devices connected in the top corner". The only thing that seems out of place to me is that when I plug my tablet in to the pc, I do not get the allow USB debugging pop-up. What gives?

 

probs need to be put in dev mode.

 

Should have used a free touch recording app instead