• Log in or sign up for an account here: https://www.sythe.org/login

[REWARD] New Build Will NOT Turn ON

I didn't read any of the responses but I bet your pins are bent. You should remove your cpu and check. If this is the case you could send your mobo the to the manufacture usually costs about $35 to fix. If the pins aren't bent you're in luck because most likely you can return the mobo with ease.
 
Did you end up getting the board?
 
ffs, new motherboard and it's still not working? Wtf could it be seriously...

Hmm...
The computer should start if it has a working motherboard and a working power supply and everything is hooked up right.

Even if any of the components are not working, like ram, HDD, GPU, it should power up and give loud beeps with the motherboard speaker plugged in.

Are you 100% posotive the PSU is hooked up right, and all the wires are connected in the right place?
 
Hmm...
The computer should start if it has a working motherboard and a working power supply and everything is hooked up right.

Even if any of the components are not working, like ram, HDD, GPU, it should power up and give loud beeps with the motherboard speaker plugged in.

Are you 100% posotive the PSU is hooked up right, and all the wires are connected in the right place?

What could i be missing... I have the four prong one plugged in and the big one plugged into the motherboard.
 
I can't believe it... the case had the power switch wires coded red when they should have been orange for my mobo... what a derp.
 
What could i be missing... I have the four prong one plugged in and the big one plugged into the motherboard.

Do you have all the cables coming from the front of the case to the motherboard plugged in and in the right spot?

Here is a picture from your motherboard manual on where to connect everything.
QNzFc.png


Edit:
Just seen what you said, I figured that is what the problem was when you said everything worked! Glad you got it working!
 
<3 n4n0
Discord Verified
Two Factor Authentication User
Community Participant
Spam Forum Participant
Sythe's 10th Anniversary
Sythe Awards 2011 Winner
I can't believe it... the case had the power switch wires coded red when they should have been orange for my mobo... what a derp.

Only plug in the bare bones and see if you get anything. If there is no lights it means something is plugged in wrong.
 
Back
Top