Adblock breaks this site

Running Multiple Accounts/Bots

Discussion in 'RuneScape Miscellaneous' started by Arcra, Aug 2, 2010.

Thread Status:
Not open for further replies.
  1. Arcra

    Arcra Member

    Joined:
    Jul 26, 2010
    Posts:
    50
    Referrals:
    0
    Sythe Gold:
    0
    Running Multiple Accounts/Bots

    1st off this is my way.

    Step 1:

    Download Sun VirtualBox

    http://www.virtualbox.org/wiki/Downloads

    And Install.

    Step 2:

    Create a Virtual Box

    It is generally straightforward, refer to google if oyu cant figure out how to set up a virtual box.

    Settings to use:

    Ram: 192MB-512MB - My Bots can deal with 192 MB if im running tinyXP BARE (See Below) but you have to go higher depending on your OS.
    Important thing to remember, it LOCKS this amount of ram while running, so at 512 MB of ram each 2 GB of ram will only get you 3 boxes max on windows XP Host OS.

    Virtual Hard Drive: Create new / Dynamically expanding/(I use 4 GB size)

    Graphics Acceleration: 128 MB video ram/all available enhancements.

    network settings: Bridged Adapter > Your LAN Connection's name (Haven't tested using other connection types)

    CPU Cores:
    only 1.

    PS: not all of these options are available in the creation wizard, specify them in settings afterward.

    Step 3:

    Install your operating system.

    First, get your operating system. (In bootable .ISO form)

    - I use TinyXP Rev09 / Bare with/IE/WMP/OE For Most botting.
    (Are Torrent Links Allowed Here? to be on the safe side(Don't want banned on Sythe!), just Google "TinyXP Rev09 Torrent")

    Add the .iso under "Storage" in the box's settings.

    Start the box.

    Proceed with installation as you would for a Regular Computer. (Tut on this is out of scope, Google)

    aand...

    Step 4:
    Set up for the bots!

    Make sure internet is working for the box - Google how to set it up if my method above (just settings) didn't work for you.

    Download JRE/install...

    Download your bots/install

    NOTE
    You can put your bot files on a CD image and add it to storage in box settings to speed things up.
    END NOTE

    Step 5:
    The Hard Part.

    Now, open up internet explorer, go to settings>Connections
    Check the Use a proxy for LAN connections box...

    Now, the hard part, you have to FIND a proxy that is anonymous or high anonymous, has good average response time, and good uptime...

    Google has a lot across sites, but only 1/100 are going to work. - You may want to buy access to some i guess if you are impatient.

    After this is done, feel free to bot.

    NOTE
    You probably want to go to whatismyip.com and make sure the proxy is working before botting.

    NOTE
    You Should Vary System ram a little to make these things unique. (IMO)

    NOTE
    After a few boxes, you shouldn't take more than 5 min before you start botting. (Without proxy searching that is..)

    NOTE
    If running more than 1, on a multicore CPU, go to Taskmanager and set affinity so they each get their own core. Or if not enough then distribute them over the cores, and leave one free to run the host OS and dungeoneer all day Legitimately. ^_^
    (4 CORE - 6 Boxes - 2 Boxes per core and one left to play on host OS legitimately is my setup.)

    NOTE
    When changing accounts, no reason to make a new box, just tweek the ram setting and change the proxy.

    NOTE
    Bots with AUTH CODES don't like it when you do this without unique auth codes!
    --------------------------------------------------------------------------
    OK, yeh it's pretty basic, but it gets the job done well.

    I Wrote this whole thing myself. (Finished @ 11:02 PM...)
     
< BodegaScape [317][24/7] | `~How to get a NEW Bounty Hunter Target (Explained)~` >
Thread Status:
Not open for further replies.


 
 
Adblock breaks this site