Can somebody link me to a free memory upgrade program?

Discussion in 'Programming General' started by Reasoned, Jul 11, 2009.

Can somebody link me to a free memory upgrade program?
  1. Unread #1 - Jul 11, 2009 at 2:39 PM
  2. Reasoned
    Joined:
    Jul 4, 2009
    Posts:
    108
    Referrals:
    0
    Sythe Gold:
    0

    Reasoned Active Member
    Banned

    Can somebody link me to a free memory upgrade program?

    I have an HP Desktop that is about 4 years old and it always says terminal memory is too low. Any programs that I can download free for more memory? Please post or pm me. Thanks!
     
  3. Unread #2 - Jul 11, 2009 at 2:46 PM
  4. -MP
    Joined:
    Jul 11, 2009
    Posts:
    164
    Referrals:
    0
    Sythe Gold:
    0

    -MP Active Member

    Can somebody link me to a free memory upgrade program?

    Mate a program wont help you, it will just configure your system files to be tweaked, it will only help slightly.


    Firstly I suggest you to get ccleaner and maybe run a clean.
     
  5. Unread #3 - Jul 11, 2009 at 3:35 PM
  6. Reasoned
    Joined:
    Jul 4, 2009
    Posts:
    108
    Referrals:
    0
    Sythe Gold:
    0

    Reasoned Active Member
    Banned

    Can somebody link me to a free memory upgrade program?

    I deleted unwanted files, currently running disk defragmenter, and updating my virus stuff. What else can I do? It says virtual memory too low, but it says I have 88% free space on my C: Drive
     
  7. Unread #4 - Jul 11, 2009 at 4:35 PM
  8. SuF
    Joined:
    Jan 21, 2007
    Posts:
    14,212
    Referrals:
    28
    Sythe Gold:
    1,234
    Discord Unique ID:
    203283096668340224
    <3 n4n0 Two Factor Authentication User Community Participant Spam Forum Participant Sythe's 10th Anniversary

    SuF Legend
    Pirate Retired Global Moderator

    Can somebody link me to a free memory upgrade program?

    This should be in tech support... You need more ram... You should set virtual memory higher...


    http://support.microsoft.com/kb/308417


    Here is a copy and paste:

    How to manually change the size of the virtual memory paging file
    You must be logged on as an administrator or as a member of the administrator&#8217;s group to complete this procedure. If your computer is connected to a network, network policy settings may prevent you from completing this procedure.

    To manually change the size of virtual memory, follow these steps:
    Click Start, click Run, type sysdm.cpl in the Open box, and then press ENTER.
    Click the Advanced tab, and then under Performance click Settings.
    Click the Advanced tab, and then under Virtual memory click Change.
    Under Drive [Volume Label], click the drive that contains the paging file that you want to change.
    Under Paging file size for selected drive, click Custom size, type a new paging file size in megabytes (MB) in the Initial size (MB) or Maximum size (MB) box, and then click Set.
    Click OK to close the dialog box and apply changes.
    Note After you change the size of the paging file, you may be prompted to restart Windows. If you are prompted to restart, the changes will not take effect until Windows is restarted.

    Notes
    To have Windows select the best paging file size, click System managed size. The recommended minimum size is the same as 1.5 times the RAM on your computer, and 3 times that figure for the maximum size. For example, if you have 256 MB of RAM, the minimum size is 384 MB, and the maximum size is 1152 MB.
    For best performance, do not set the initial size to less than the minimum recommended size under Total paging file size for all drives. The recommended size is the same as 1.5 times the RAM on your computer. It is good practice to leave the paging file at its recommended size as performance can decrease if a paging file is too large. However, you may increase its size if you frequently use programs that use lots of memory, such as graphics programs or games.
    We strongly recommend that you do not disable or delete the paging file because this can lessen the computer's performance. However, if you decide to delete a paging file, set both the initial size and the maximum size to zero, or click No paging file.
     
< need help with something small forgot how to do this.... | need help with autofighter NX bot >

Users viewing this thread
1 guest


 
 
Adblock breaks this site