How to put Interior lights in your car.

This guide will be about how to set Neons or Interior lights in your car.

Things you will need:
A switch,
Some old wire, need about 1 length of 2-3m ( I used mums old christmas lights, not the lights, but the wire) Although, these could be used if your ghetto enough to use them.
A light or neon, Can be bought for around $25.
A screwdriver.
some electrical tape.
A screw.
And a nice car..?
A solder, Can use eletrical tape as a substitute.

You have all your materials.

Step One:
Go under your dash board and open up your fuse box.
Find a fuse and pull it out..Get your first piece of wire, and pull off the plastic ends, (Around 1-2cm). Wrap your first piece of wire around it,and plug the fuse back into the same spot.

Step Two:
Solder, or use electrical tape to secure the wire to the switch. There is little eletrical things you can buy, that will hold it in place..Ill take a picture tomorrow..

Step three:
Get your led light, there should be two wires coming from it, Solder ONE of the wires to the opposite side of the switch. The other wire is earth and will be used later on.


Step four:
You need to earth the wire to somewhere, get your screw and wrap the wire around the screw, find a little whole in your car that you can screw your screw into for earth.

Step five:
Flick your motherfucking switch to get your lights to work. xd

This guide may be confusing for idiots, if you know simple eletrics, its quite easy..

FAQ:
My lights arnt working. Why?
This could be many reasons.
Try connecting your lights straight to the battery, if they dont turn on, then your lights are blown.

My lights arnt blown, But its still not working?
Make sure you earthed them properly. Sometimes you may need to change where you have earthed the lights.

Still not working?
Maybe your lights are negative/positive, try switching the earth with the switch and the switch with the earth



Will provide pictures soonish.
If you cant follow this guide then your a retart.
Im 15 and can do it.

A few pictutres of the interior of my car,
These pics are fairly old and i have since then cut holes in the carpet and run the wire undernearth the carpet.