~[Tut]~ Help with building a RS2 Private Server ~[Tut]~

Welcome Ladies and Gentlemen to my guide on building a Runescape Private Server. Before I get spam I willl mention some guides i read that helped me on this. I God Iliki on Moparscape forums guide, and coding guides on moparscape upon many commands XD
This guide includes
Step by step on getting the tools to make it which are as followed
-No-Ip
-JDK
-Source
-Client
-Port-Forwarding
-Some Simple Coding (Newbie Friendly :])
A List of good clients/sources
Credits
Ok so lets start this by explaining a bit about myself. my name is Shawn..I am 13 and am the owner of LagoonScape. I have been playing Runescape and RS2 Private Servers for about 3 years. Servers i play or have played
-GildedPkScape
-Rileyscape
-YScape
-Cerda Online *Nice Coding*
-DoomRealm
-BloodRealm
-LagoonScape
and those are only some
Ok so the first part of my guide is No-IP
Step 1. Go to www.no-ip.com and register a account
Step 2. 1ce you have registered you should see a blue rectangle that says download. click this and it should bring you to download.com. click download now.
Step 3. now it should be downloaded/installed now open it and sign in on the downloaded part...with ur email and password you made.
Step 4. click in the little box with words it should say click here to add or edit hosts click there then it will change to 1ce you finish click here to refresh and a page should appear. type in for the service name type in name for your server for instance mine is lagoonscape
Step 5. Ports have them both 45394
Step 6. For the toggle menu choose which you would like such as no-ip.biz this is up to you.
Step 7. Press Add host at bottom and hit the refresh on your logged on thing and you are all set with no-ip!
Getting JDK
Step 1. Go here http://java.sun.com/javase/downloads/index.jsp and click on the JDK 6 Update 6 and download the offline first and if it does not download then do the online download install etc. and you are all set with Java!
Getting a Source
Step 1.A source is what runs your server. let me cover getting a source. basicly a good source is the Zdiddy base source but there is a lot i suggest going with a source that isnt much coding if you are new but if you have coding experience i suggest ZDR Base source. but with the zdr source you need a specific kind of client or it will freeze. Note-BEFORE YOU DOWNLOAD ANYTHING VIRUS SCAN IT!!!! oh yes and it can still be hidden in java encoding so when you download do a specific virus scan 1ce you decompress the file. Moparscape.org/smf is a good site to find a source or client look in the downloads section.
Decompression of a source/client
Step 1. Basicly you need WinRar for it. download this file on rarlab.com
Getting a Client
Step 1.Well if you are a new coder i suggest either the silabsoft client or the moparscape client.
SilabSoft Download-http://w13.easy-share.com/1700400917.html
Moparscape Download-http://rs95.rapidshare.com/files/28641428/MoparScapeInstall.exe
For other clients which are for the more experienced coders look on moparscape.org/smf in downloads section or search on google or rune-server.com(Must Register)
PortForwarding Help
How to portforward and what is port forwarding?
Portforwarding is opening up ports so others can connect to your server.
and basicly its pretty simple but i can only explain for NetGear Routers because thats what i have. if you have another kind of router look on portfowarding.com. ok so for netgear users in the address bar of your internet type in 192.168.1.1 and type in admin for user and password for username unless a specific password was placed on your router then type in that password. now click port forwarding/port triggering. click add custom service. for the service name make it your service names. for the ports have both of them 43594. make it TCP and for the ip click run on your start menu type cmd then ipconfig it will say your ip such as 192.1.1 etc..
type that in there.
Click add service and your port forwarded.
and to make sure the 43594 port works click on control panel then click security then click on the firewall click advanced click add port for the name have RSPS or something and for port type 43594 and click add.
Simple Coding
How to make owner admin and mod. open up a players file go to where it says rights for owner type 3 admin 2 and mod 1 and file save oh ya make sure they are off before you do this if they aren't logged out it wont work and 1ce you save they can log back on.
How to change the source so it does not say the sources name but says your servers name
Go into the client.java and press cntrl + h type in the name of your source in the top type in box and name of your server in other and click replace all save it and compile your server.
-Important commands-
::master *admin only*
:ure *admin only*
:ickup (itemid) (amount) *admin only*
:layers
::xteletome (player name) *admin only*
::xteleto (player name) *admin only*
::xteleall *admin only*
::banuser (player name) *admin only*
::ipban (players name) *admin only*
::starter
::kickuser (players name) *mod only*
::yell (your message)
~Credits~
Me 100%
Made my Michaelpoopy of sythe..take it and it is plagairism...thank you.
Post your thoughts ratings and suggestions...im fine with conscructive critisism but please no spamming/flaming or swearing on my thread. i will be very unhappy with this.
Thank You,
Michaelpoopy
Hope this guide helps you guys!

 

Madness man. Alot of things to do. Btw, ty for the guide.

 

Oh my god. Change the color of the blue text.

 

Hard to read.

 

Yes thank you i will fix the blue text

 

Eh, your not supposed to write guides about runescape.

 

This is not about runescape it is about Simple Java Coding and a Pserver

 

Wow.

Little tip, if you split up the text slightly it is much easier on the eyes.

But from what I managed to read before my eyes burned out, nice guide, very in-depth. Thanks

 

Whats the point of private servers?

 

This is related to runescape, it's not really Java Coding, and it's not very accurate eithier.

 

How is it "not java coding" and not accurate. unless you try guide please dont post on whether its accurate or not and please dont spamm with what you are saying thanx

 

As sinful and Juvenile have stated, this IS RELATED to runescape, and thus should NOT be posted here. If your going to post in this section, READ THE RULES.

It's for RUNESCAPE private servers, thus it is related so don't go trying to convince me that it isn't.

As for commenting on the guide itself, I would say 6/10.
-No pictures
-It's very hard to read
-Grammar errors
-I think I saw like six or so "Step 1's", There should only be ONE "Step 1"

 

the point of a private server?

a private server is for people who dont want to waste their life going up levels or trying to get an item but it is also good for people who are bored of rs

 

I actually use to run a private server, 2 years in a row, stopped last year. I didn't leech an source like you eithier, so you've obviously DON'T know what you're talking about. You say "help with building", all you did is list 5 steps about how to get the source.. you didn't mention how Routers require portforwarding, some compiler codes are messed up (You can tell if your compiler is messed up if it doesn't start with @echo - unless you have an client), and most of all you basically ripped this guide, from every tutorial on www.moparscape.org/smf , on how to create an RS2 P Server.

Don't tell me I'm "spamming."

 

when i read the title, i expected there to be java codes and more on the tut. etc. But good guide on setting a server up. use picturres next time.

 

This has been posted many times before, and most of those were a lot clearer with pics. Also change the font color, you said you would 1 and a half months ago. -.-

 

It BURNS MY EYES! 0/10

 

Do you have to give everyone a bad rating?
This would be an ok guide, if it wasn't Runescape related.

 

not bad.....

 

Piece of shit I'm not reading a wall of text with the same dark color.
THERE ARE NO RUNESCAPE GUIDES ALLOWED.


/Final.
1/10.