[[GUIDE]] Making a tobacco pipe [[GUIDE]]

How to make a tobacco pipe:

1. Get a big fat metal pen, take it apart and take the center peice:



At the right end of the middle of the pen is solder, it was already put together to see if it would work and it did so dont mind the solder.

Okay, so you now have a metal middle area of a pen, now you need two sockets [ you use sockets with some tool's out in the garage, im sure your parents have some ]

Now, take the sockets one that will fit perfect into the end as shown below you need one that starts out skinny and gets fat:



The example below the real socket is the socket you will need, insert the little end into the end of the pen it should fit snug, now hammer it down till it sits flush with the bigger end such as:



Now, leave the other end open as a choke [ choke is the area you put your finger over then you smoke your tobacco and release it, so you can inhale the tobacco smoke a lot harder.

Now add another socket on the top how? Get another one this will hold your tobacco now, it has to have a smaller end then get bigger like the one above, now drill a hole in top of the pen and put the other socket into the top small end first once its snug tap it in and put solder around it, or some other material that will seal it good and can hold up to heat.

Heres what is should look like:



now all you need is your tobacco and your in smoker's heaven, lol. Here is the finished project if you completed it right:



:noworry: guide by st1cky1cky, plus images =D
thanks for reading!

 

ahaha, such a queer ass move.
too bad im not stupid enough to fall for fake impersonations of runescape.
Your now banned, which you diserve :]

 

Hey! This is cool! I'll try this out (I smoke so I'll try this out)

 

smoking is bad mmmkay

 

i dont smoke tobacco but i have another use for it ^6

 

Spamming is bad Mkk? No one asked your input on it :nuts:

 

due to ur sig... i dont think thats a "tobacco" pipe XDDDDDDD

lol nice guide... not really important topic... but you added images and compelte information.. 9/10

 

I do smoke. I am more than 18 years old.

 

Meeee too, LOL it does work though, tried it out personally, nice guide 8/10 ( just because the pictures are a tad bit distorted)

 

Good one, but you might have forgotten that solder melts and you will be inhaling all that toxic crap.

smoking is ftw

 

you dont touch the lighter on the solder, it goes into the bowl and you down want to torch your tobacco its a waste, if you touch the solder its got to be held on it longer then just a second.

Trust me, the solder doesnt harm you you can do this u just seal the little crack around the bowl with the solder dont run it up the whole bowl, i got a little out of hand with it but i've smoked "" tobacco "" out of it 10 - 15 times already? And the solder is still there, not melted, and holding up great.

Never got a solder hit either, so you can use solder take it from the man who made this. Or you can go out of your way and go into the garage and start welding a basic little pipe together?

And if your going to go that far, you might as well just buy one.

 

Sweet guide, what about your one-roll? Make a guide for that next.

This is quite nice actually, helpful.

 

rofl, I found this and I am amazed theres tutorials for everything

Thanks I got use for this.

any tips on rolling?

 

well I understand, but you can easily just buy a pipe from your local newspaper stand with the token friendly indian. He sold be a pipe and a hookah, and nothing bad about either. But I prefer smoking "tobacco" from joints as they have roaches, and the smoke form any pipe is twice as hot and uncomfortable for the lungs.

 

why buy a pipe for $20? or more... when u can make one for free?
And its easier to pack a bowl, hit the lungs rather then roll one.. get it perfect.. etc.. etc..

Bowls = Good & not that bad on the lungs if you can handle them.
Joints = harsh on the lungs as well to a certain extent, [ Notice: your smoking paper? ]

when you smoke out of metal / glass pipes it pure tobacco.

 

Sick Ima make one of these as soon as I find a big enough metal pen , only thing I would suggest is adding screens, (which I would do.) You just have to wrap the Socket in a screen at the bottom and solder it to the socket above where it will stick out of the pen, insert the socket and then solder it to the pen and voila no chunks of burning "green tobacco" going down your lungs

 

Screen wouldn't be a bad idea but id just cut a small screen just the right size place it in the bottom and let the resin sticky it up, and hold it down.

Now reason i didnt put a area for the screen is because the bowl on the top that you put the tobacco in has a tiny little hole, enough for 1 tobacco bud or more to fit then u just smoke the bud rather then shake thats all crushed up.

Put a bud in, not shake and you wont need a screen besides sucking in a little bit of ashes isn't bad its happened to me over 50 times easily.

rofl.

peace

 

Soldering led will not melt with the low heat of tobacco, this is why there is a soldering iron... and it takes time to heat it up before you can even use it to melt (I am always using soldering iron and leds because I have electronics class). And when using soldering irons and leds, make sure you cover your mouth and nose, smelling the led is very very harmful. But hence smoking is bad for health as well.
And I am quitting cigarettes again (for like this will be the thousand times I am trying to quit, but I am addicted to it already ). Wish me luck, but before I will quit, I will deffo try this out. This is really really interesting. Really cool guide.

Yeah, good thinking about putting some screen or you might sip the tobacco while having a smoke.

(I still haven't found a shitty big steel metal ball pen! FFS!)

EDIT: (Added) LOL! What the heck, you inhale the ash ROFL! You were like my friend way back ages ago, he swallowed all the smoke when he first lighted a cigarette.

 

This is a good guide i guess.
I'm slightly pissed off that i now have a stoner writing guides, just like me.
i thought i was the only one that was gonna write guides on this shit
Nice guide though
I personally don't like pipes much, but i have a glass one, so this guide is useless to me. But i still read it to make sure your not giving bad info And you didn't, so good job,
And keep it 420 nigga.

 

sTONER? Who me? I only smoke " tobacco " haha im kidden ye i light up that green shizzle you know me homie :nuts: haha, ye i wrote this up for them othe stoners out here in this community.

God i love my pen pipe its tight.
haha