How to burn ps2 games without a modchip

How to burn and play PS2, and PSX games on your PS2 without a modchip



In this guide, you will learn the very easy method of making copies of your PS2 and normal Playstaion games so that they are playable on the PS2. This guide will provide you with all the information you need to burn PS2 games. {mos_sb_discuss:18}
You will need the following things to burn PS2 games:

* a computer with a cd burner
* a blank cd-r (don't use the re-recordable type a.k.a. cd-rw)
* CDRWIN – The version in this guide is 3.8D
* FireBurner –
* PS2 patcher –
* GameShark 2 for PS2 - the GameShark 2 is available at most stores that sell video games, a few examples would be Best Buy, Circuit City, or Target. You want version 1.0 of the GameShark 2. I have heard that all other versions work, but I have only tested version 1.0. GameShark2 costs about 29.95. Believe me, its worth it!!!
* and a PS2 to play the games.

Burning the PS2 Game

The process of burning ps2 games is easy. It is really only a 3 step process.(read the game, patch the game, and burn the game.)

1 ) insert game into cd drive.

2 ) Open up CDRWIN and click on the extract disk/tracks/sectors button.

3 ) Your settings should be as follows:

* For "extract mode" select disk image/ cue sheet
* For "read options" select "raw"
* For "error recovery" select "abort"
* For "jitter correction" select "auto"
* For "subcode analysis" select "auto"
* Data Speed and Audio Speed should be the same
* For "read retry count" type 0
* For "subcode threshold" type 300
* Make sure you selected the drive that your PS2 game is in

Make sure you typed in the file name (just type the name of the game) and Check the directory that you're putting your file in.

Then just press "start"

If you get an error in the middle of reading the disk that says something like "can't read sections xxxx-xxxxx of disk", it is becase the disk is scratched and CDRWIN can't read it. Try to clean the disk, if that doesn't work you just have to use a different game (a different copy of the same game)

4 ) Once CDRWIN is done, click ok and then exit CDRWIN. Open up the PS2 patcher, select the game file you just created and patch it (make sure you select the "RAW" option.

5 ) Close the PS2 patcher, next open up Fireburner. Click on the visual cue burner button. When you created your .bin file (the game file) in CDRWIN, a .cue file should have automaticly been created. In that case, drag and drop the .cue file into the Fireburner window. If the .cue file was not created, just drag and drop the .bin file into the Fireburner window. After you have done that, right click (click with the right side button on your mouse) on your file in the Fireburner window, and select "Burn/Test burn".

6 ) In the options window that appears, select your cdwriter, select your write speed(doesn't really matter), and make sure you select "Track at once (TOA) for the recording method. As for the options on the right side of the options window, make sure only the following are checked: "eject cd" and "close session".

When you have selected the options, click ok and your PS2 game will burn. That's all you have to do to burn a game.
Burning a Playstion (PSone) game

1 ) If you want, you can spend 5 minutes using the same method as above to burn your playstation game, but its not necessary. For a playstation game (not PS2) all you need to do is use a program that lets you make an "exact copy" or a "backup disk (CDRWIN)" You don't need any selected options, you just need to start the game on the PS2 the same way you would a PS2 game.
Starting the game on your PS2

1 ) Now for the fun part (and challenging part the first couple of times) This may sound a little complicated at first, but after you do it 3 or 4 times, it's super easy. First things first, you must remove the front of your game drive on your PS2(not a big deal, it can snap on and off).

2 ) Now insert your gameshark 2 cd(make sure the gameshark memory card is in one of the 2 slots, doesn't matter which one.)

3 ) In the gameshark options, choose "start game", then "without". Your screen should read "Please insert game disk then press X to continue."

4 ) Now this part can be trickey for beginners, so I will provide pictures

-the main purpose of this starting method is to open up the PS2 and swap the gameshark disk with your burned game without the PS2 knowing you did it. DO NOT press the eject button on the PS2!!!

-with the PS2 cd tray cover removed, you will be able to look in and see a while tab inside the PS2. With a credit card (or something like it) gently slide the white tab all the way over to the right, if you did it correctly, this should allow you to manually pull open the PS2 cd tray.

5 ) Next, take the gameshark disk out of the PS2 and put in your burned game.

6 ) Gently push the PS2 cd tray fully back into the PS2 (Don't press the eject button).

7 ) Now you need to slide that white tab all the way back to the left (its origional position). To do this you get a strong papper clip(needs to be a strong one) stick it into the PS2 on the right side of the white tab and push the tab back to the left.

8 ) If you pushed the tab all the way back to the left and did every thing else right, you are ready to play your game. Just press X on your PS2 controler and watch as your burned game loads. ( It may load slower than an original game, depending on the cd-r you are using, I use Verbatim or Fuji or Sony cd-r's and have no problems.)


second way.... '



Here is a new guide that might help evryone out.Now Enjoy!!!
I use decrypter and alcohol 120 for most of my ps2 backups.

Okay, these are some methods to backup PS2 titles, in order to play a backup you need a method of booting it by modchip of some sort or by official boot discs such as Swap Magic. Follow any one of these instructions to fit your needs and understand that programs change and methods differ as time goes on so a little tooling around as well as some trial and error may be neccessary.

You can tell what format the PS2 title is by looking at the written side of the disc, DVD's are Silver and CD's are Purple. The DVD backup methods here consist of reading the image to the hard drive then burning it to the media for an easier backup, this depends on your PC hardware and its setup. I say that because the proper setup would be to have capable components like enough Ram and a decent CD/DVD Burner; but mainly have the Reader and Writer on separate IDE cables; this allows no cross information when doing Disc to Disc/On the fly copying. But, since most people would not know how to check or fix this, I suggest reading the image to your Hard Drive and then burning from there.

*A little useful trick*, if the DVD backup "image" is small enough in size you can fit it onto a CD-R (80 minute or larger if need be) instead of using a more expensive DVD-R. Some titles have DVD checks so it will not work all the time, but it doesn’t hurt to try it on a CD-R and there are patches on the web to fix the ones that might not work. In addition a DVD Movie backup will play on a PS2/Xbox WITHOUT a modchip, this is also the best way to find out if your system likes that particular media. Plus remember this is just a guideline in which to help you get started, so fiddle with settings and options so as you can learn. As I get more info, I will try to keep this tutorial updated. Oner


PS1/PS2 CD backup tutorials


Using CloneCD (v4.x.xx) for PS1/PS2

1. Start CloneCD
2. Select "Copy CD"
3. Select your Reader, press Next
4. Select "Game CD", press Next
5. Select/Deselect your options here (on the fly, cue or delete) then press Next
6. Select your Writer, press Next
7. Select your burn speed and "Game CD"
8. Press "OK" to begin


Using Alcohol 120% for PS1/PS2

1. Start Alcohol 120%
2. Select “Copy Wizard”
3. Select your Reader & Read Speed
4. Select or Deselect “Copy current disc on the fly”
5. For Data type select which console PS1 or PS2, press Next
6. Select your Image location and Name for it, press Next
7. Select you Writer, Write Speed and anything else you feel you might need
8. Make sure the Data type selected is the same you chose above
9. Press Start to begin


PS2 DVD backup tutorials


Using Prassi (RecordNow Max is very similar, so this should be sufficient)

1. Start Prassi Primo
2. Select "go to full application"
3. Right Click the drive that has your original in it
4. Select "build global image" and choose a path for the image (preferably on an NTFS operating system)
5. After the image is extracted go to next step
6. Choose the 3rd disc icon from the left *or* click file, new job, Global/Other Image
7. Then just burn the .gi (global image) of the game


This next way has one less step which saves some time because once you press record it does everything by itself (if you have a DVD reader and DVD Writer)

1. Start Primo
2. Use the "PrimoDVD Starter" (it's easier, and less confusing)
3. Choose "disc copy"
4. Select your Reader and Also your Writer
5. Select "make a temp image on HD..."
6. Select your burn speed and then record to begin


Using Nero

1. Start Nero, Use the Wizard (for easy use)
2. Select "DVD" then select Next
3. Select "Copy a DVD" then select Next
4. Select your source drive
5. Select or Deselect "copy on the fly" then click next
6. Select your write speed
7. Select either "Test", "Test and Burn" or "Burn"
8. Press "Burn" to begin

This next way is without the Wizard

1. Start Nero, and select "File" then "New..."
2. On upper left side of the window from the drop down menu select "DVD"
3. Select "DVD Copy" Icon
4. Select "Copy options" tab
5. Select or Deselect "copy on the fly"
6. Select source drive and read speed
7. If needed Select "Image" tab to choose image directory and select/deselect "delete image..."
8. Select "Burn" tab and choose your settings
9. Press "Copy" to begin


Using Alcohol 120%

1. Start Alcohol 120%
2. Select “Copy Wizard”
3. Select your Reader
4. For “Separate Image file every:” choose “Never Separate”
5. Select or Deselect “Copy current disc on the fly”, press Next
6. Select your Image location and Name for it, press Next
7. Select your Writer, Write Speed and anything else you feel you might need
8. Select or Deselect “Delete image file after recording”
9. Press Start to begin


Using DVD Decrypter

1. Start DVD Decrypter
2. Select Mode, go down to ISO Read
3. Select your Reader & Destination
4. “Decrypt” the ISO Image to the Hard Drive
5. Wait for the ISO Image to be made
6. Select Mode, go down to ISO Write
7. Select the ISO Image file you made, click “Open”
8. Select your Burner, Write speed & Burn the ISO

 

Awesome guide. If only I had ps2.

 

Lol I got ripped off..I used to buy Burned Ps2 games for 10 bucks each when i can make em

 

This is pretty much useless now since no good games come out for ps2 anymore. Good guide though.

 

http://www.cdrom-guide.com/forums/showthread.php?t=276919

Please gtfo.

 

wow leeched........nerd

 

You leeched my signature.

Therefore, you may gtfo as well.

 

Nice one! ~ But sadly I don't have one, I'm gonna get one soon, after my exams >"<

 

Wasn't this originally an Essaycrawler creation?

 

He's banned.

 

Good guide

 

Haha, I'm going to do this and sell to gamestop

 

Good guide, even if leeched.
Gamestop isn't gonna buy burned games retard

 

God, leeching...
The great fist of the lord Bannzor sez hello.

 

nice ;]

 

http://www.srl-forums.com/forum/burn-ps2-games-t30798.html

lol effing Leecher

 

Good but leeched

 

haha very logical very nice.. i have a ps2 with a modchip and i never knew you could play burnt games without it. By the way i have a question while we're at this topic. Can a modchip play both pal, and ntsc games? or just what the ps2 is able to play?