find colo x,y,no#,0,0,100,200

I need a guide to using the if(findcolor.....) command...im absolutely clueless.
i even made an autoburyer using co ordinates lol..

 

FindColor(x,y,TheColor,X1,Y1,X2,Y2): Boolean;

When it finds the color in the box made with (X1,Y1) and (X2,Y2) then it will save the coordinates it found it in as x and y and will result true.

The first 2 parameters will always be x and y or else some other variables. First, you have to figure out the color you are looking for. Lets say your color is 55555. Next, you have to figure out where you want Scar to look for the color. That will be in between the points (X1, Y1) and (X2, Y2). If Scar finds the color 55555 inbetween (X1, Y1) and (X2, Y2) then it will result true.

Then, you can say

Code:

if FindColor(x, y, 55555, 255, 255, 355, 355) Then
begin

If it found the color then it will do the things after begin.

There is also FindColorSpiral, which is about the same except it looks using a spiral. FindColorTolerance, which will look for the color using a tolerance, FindColorTolerance(x, y, Color, X1, Y1, X2, Y2, Tolerance). Or FindColorSpiralTolerance which looks for a color with a tolerance in a spiral, FindColorSpiralTolerance(x, y, Color, X1, Y1, X2, Y2, Tolerance).

 

I can't fricking post on these. Idk why... And now it posts... I had a whole explanation ready two hours ago. Thanks for doing it Town.

 

thnx anyone man

 

ok so how would i use it in an autominer?