New gaming desktop, no display, need help

I recently bought all new parts, for my gaming desktop.

It turns on, everything lights up, all fans spin, it kinda makes that clunk clunk sound, when starting up, but no display, the hdmi is fine, it work from my laptop to monitor, im wondering what the issue could be. any help would be dope.

CPU: AMD FX-6300 3.5 GHz 6-core
MOBO: Gigabyte GA-78LMT-USB3 Micro ATX AM3+
RAM: Corsair XMS3 4GB (1 x 4GB) DDR3-1333
GPU: MSI Radeon R7 250X 2GB
Case: NZXT Source 210 Elite (White) ATX Mid
PSU: Solid Gear Basix Series 600W ATX Power Supply
Optical Drive: Samsung SH-224DB/BEBE DVD/CD Writer

​

 

Do you have a gfx card? Or connecting it to mobo

 

I do have a Gfx, but i took it out to get the first boot, on the mobo.

When my fiance gets here, i'll take some pics of the wiring/hardware. Everything is in the right place, I have had some IT guys i know, talk me though everything, they can't figure it out either, im wondering if theres some magical method I haven't tried yet.

 

List EVERYTHING you are using in the build. I spent 4 hours troubleshooting over skype with someone a few months ago to find out the issue was literally due to the power cables for the closed loop liquid cpu cooling being swapped.

Sometimes a failure to boot can be caused by something so simple, that it gets overlooked time and time again.

 

Unplug GPU and try to boot on integrated (plug hdmi directly into mobo.) That's a good first step as it will tell you if you are looking at a GPU problem or failure to POST.

As it stands you haven't given nearly enough information for someone to help you.

 

Updated specs on first post.

 

Happened to me. Spent 3 days and turns out after taking it to shop it was my fault. Do you have a full modular psu? Make sure it's completely plugged into the graphics card and also make sure that you don't force the plug into the psu you carefully push it I'm until you hear a click.

 

Updated a picture on first post.

 

So you took the video card out. What happened when you plugged your hdmi into the motherboard?

Also you don't have any drives hooked up in your picture. Computer shouldn't post if it can't find any drives.

 

I get no display, i need to fix this problem before I can focus on anything else, I have been told by one source, the BIOS needs updated, but I am not sure if thats the problem, or if I could even do it.

 

Yeah I think I found what is giving you problems. Your motherboard only supports RAM up to 1.5v but your ram wants 1.65v.

 

At first it I put a 1600, then i checked and it said it supports, 1333, correct?

 

It's not about the speed, it's about the voltage. Higher quality ram will run at 1600mhz at 1.5v

Or you can just buy 1333mhz 1.5v or 1.35v ram and the difference would not really be noticeable.

 

I just checked, they're both 1.5v.

 

I must be looking at an older revision of the ram. If you still have it check your motherboard box for a small speaker. I can't tell if you have 1 installed in the picture but the speaker will give you an error code that can help tell you what is wrong.

 

My case didnt come with one, so i dont think I have one, which is upsetting, I think im gonna have to take it to a repair shop.

 

You have a nice setup sorry it is not working =/

 

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems


P.s if that doesn't work try removing the ram at all then boot it up(might need to connect speakers) and check if you hear a beep

 

Bump. Anymore theories?

 

Take it to a PC shop, more than likely they'll see the problem instantly and do tell you the problem for free. If they charge anything it would be like 40$ tops.