Dual Monitors

I need help with getting two monitors working on my computer, I know that all the cables are working as it is brand new and there is signs of the computer knowing that the monitor is plugged in. The problem is that the second monitor will not come out of 'Power Saving Mode' and this is happening because it is not picking up signal from my computer that It should be doing something.

I have installed the drivers for the monitor
It will not get identified through the control panel display options
The graphics card that I am using currently is ATI Radeon HD 5400.

Any help would be appreciated

 

Hey Xahek, I would imagine you are running Windows. Is this Windows 7? If so, right click your desktop then left click the "screen resolution" button. It should pull up a page with 2 monitors showing. If it does not, the computer is not detecting the second monitor.

While I am rather unfamiliar with the "Catalyst Control Center", I would imagine it will allow you to bring up a displays manager. Make sure that the monitors are detected in there. If they are not, try disconnecting them and connecting them again. Also, make sure one is connected through your DVI port and the other through HDMI/VGA.

On a side note, it appears that there is a lot of trouble with Dual-Monitors on that card.

 

Make sure both monitors are connected into the card, and not one in the card one in the motherboard.

 

Right, so it's not possible at all to have both of the monitors connected via VGA?

 

Both of the monitors are being picked up by the computer as it stated the name of the screen's when their properties are shown when I click the "screen resolution" from the desktop.

 

I'm not sure how I would find out if I'm doing this correctly, all I'm doing is plugging VGA cables in the VGA slots on the back of my computer system

 

If you have teamviewer you can PM me and I can set it up for you if you'd like, would take all of 10 seconds.

 

I have two monitors both plugged into VGA, I think that's the problem

 

I'm pretty sure you put one in the graphics card and another in the mobo.

 

Open your case then you can see if one is in the motherboard and if one is in the graphics card.

 

I've got a see through side panel and yes one in the video card, one in the motherboard

 

Then both need to be in the video card. That should be the problem. (Trippin answered it). Try that and tell us if it works.
If you need to get a DVI -> VGA connector (although one may have come with your card).

 

Just bought a VGA -> DVI adapter, I'll try it when I get home and see the outcome

 

The adapter did the trick and everything is working fine now, thank you everyone for all the help you provided! much appreciated!

 

Glad it worked!